1.1 This consumer safety specification covers performance requirements, test methods, and marking requirements to promote safe use of bassinets and cradles.1.2 This consumer safety performance specification is intended to minimize the risks of incidents to an infant resulting from normal use and reasonably foreseeable misuse of a bassinet or cradle.1.3 This consumer safety performance specification covers products primarily intended to provide sleeping accommodations for an infant up to approximately 5 months in age or when the child begins to push up on hands and knees, whichever comes first.1.3.1 Examples of Products under the :1.3.1.1  Bassinets, cradles, compact bassinets, and compact cradles.1.3.1.2 Cradle swings with an incline less than or equal to 10° from horizontal while in the rest (non-rocking) position.1.3.1.3 Multi-use products when they are in the bassinet/cradle or compact bassinet/cradle use mode as defined in 3.1.1 or 3.1.3.1.3.1.4 Bassinet/cradle accessories to products when removed from the product and used in the bassinet/cradle mode or as a compact bassinet/cradle product. See 3.1.2 for an example.1.3.1.5 Bassinet/cradle features for carriage/stroller when removed from the carriage/stroller and used in the bassinet/cradle mode or compact bassinet/cradle product mode.1.3.2 Examples of Products Excluded from the : 1.3.2.1 Sleep products that have only inclined sleeping surfaces intended to be greater than 10° from horizontal while in the rest (non-rocking) position.1.3.2.2 In-bed portable sleepers.1.3.2.3 Enclosed travel tents.1.4 No bassinet or cradle produced after the approval date of this consumer safety performance specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein.1.5 This consumer safety performance specification is not intended to address incidents and injuries resulting from alteration or unreasonable abuse or misuse of the product by a child or child care giver.1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.7 The following precautionary caveat pertains only to the test method portion Section 7 of this consumer safety performance specification This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.FIG. 1 CAMI Infant Dummy, Mark II 17.5 lb (7.9 kg)FIG. 2 CAMI Newborn Dummy 7.5 lb (3.4 kg)1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 843元 / 折扣价： 717 元 加购物车

1.1 This consumer safety performance specification establishes safety performance requirements, test methods, and requirements for labeling to minimize the identified hazards to children presented by infant bedding and related accessories as identified in the introduction.1.2 Infant bedding and related accessories includes the following items intended for use in a nursery: fitted sheets, blankets, dust ruffles, covers and drapes for canopies, pillows, mattress covers, diaper stackers, fabric wall hangings, crib bumper/liners, and comforters.1.3 No infant bedding or related accessory produced after the approval date of the consumer safety performance specification shall indicate, either by label or other means, compliance with this specification unless it conforms to all applicable requirements contained herein.1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.5 The following precautionary caveat pertains only to the test method portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 590元 / 折扣价： 502 元 加购物车

1.1 This consumer safety specification covers all flame-producing consumer products commonly known as utility lighters (also known as grill lighters, fireplace lighters, lighting rods, or gas matches) and such similar devices as defined in 3.1.14. Matches are specifically excluded from this specification; flame-producing products intended for igniting cigars, pipes, and cigarettes are also specifically excluded from this safety specification and are covered in Consumer Safety Specification F400.1.2 This specification establishes requirements for utility lighters to ensure a reasonable degree of safety for normal use and reasonably foreseeable misuse of such utility lighters by users.1.3 Utility lighters, being flame-producing devices, as do all flame sources, present a potential hazard to the user. This specification cannot eliminate all hazards, but it is intended to minimize potential hazards of utility lighters to users.1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.5 The following precautionary caveat pertains only to the test methods portion, Section 8, of this specification This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 646元 / 折扣价： 550 元 加购物车

This specification establishes recognized requirements for determining the child resistance of portable gasoline containers intended for use by consumers. The following tests shall be performed: senior adult test; child-resistant test (test subject/selection criteria); child-resistant tests (test failures); sequential test; and senior adult use effectiveness to conform with the specified requirements.1.1 This specification establishes recognized requirements for determining the child resistance of portable fuel containers (PFCs) and other types of portable containers intended for use by consumers to hold, store, and transport liquid fuels such as gasoline, kerosene, and diesel.1.1.1 “Portable Fuel Container” is defined in Specification F852 and includes the receptacle for gasoline, kerosene, or diesel fuel as well as spouts, caps, and other closure mechanisms and components for use with or on portable gasoline, kerosene, or diesel receptacles.1.1.2 This specification is also applicable to spouts, caps, or other closure mechanisms sold separately for use with or on a fuel container.1.1.3 This specification does not cover one-time use portable emergency fuel containers conforming to Specification F2874.1.2 This standard addresses the effectiveness of the child resistance (CR) device only after closure cycling, but does not address closure effectiveness:1.2.1 When at high or low temperatures,1.2.2 After thermal aging of polymers,1.2.3 After exposure to sunlight,1.2.4 After exposure to intended fuels, and1.2.5 After physical abuses, such as drops or impacts.NOTE 1: Please see Appendix X2 for additional information on these exemptions.1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 590元 / 折扣价： 502 元 加购物车

This specification provides for the identification of polyethylene plastics molding and extrusion materials from recycled post-consumer (HDPE) sources. This specification covers post-consumer HDPE materials from the following: (1) blow molded household chemical containers, (2) blow molded milk, juice, and water containers, (3) materials from the spunbonded process, (4) thermoformed packaged food containers and personal care packages, (5) injection molded packaged food containers and beverage bottle base cups, and (6) injection molded housewares and industrial articles such as pails, crates, totes, and pallets. The melt index, nominal density, tensile strength, and secant modulus of elasticity in bending shall be tested to meet the requirements prescribed.1.1 This specification provides for the identification of recycled post-consumer HDPE molding and extrusion materials, from specified sources, in pellet or chip form so that the supplier and the user can agree on the acceptability of lots or shipments. This specification covers post-consumer HDPE materials from the following: (1) blow molded household chemical containers, (2) blow molded milk, juice, and water containers, (3) materials from the spunbonded process, (4) thermoformed packaged food containers and personal care packages, (5) injection molded packaged food containers and beverage bottle base cups, and (6) injection molded housewares and industrial articles such as pails, crates, totes, and pallets. Other post-consumer HDPE materials may be added to this specification when such material streams are characterized.1.1.1 The tests described in this specification are intended to provide information for identifying these materials. The separation by sources improves the usefulness of the materials.1.1.2 It is not the function of this specification to provide specific data for design purposes.1.2 This specification provides a procedure to certify that the materials are from post-consumer sources.1.3 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.1.4 The following precautionary caveat pertains only to the test method portion, Section 10, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.Note 1There are no ISO standards covering the primary subject matter of this specification.

定价： 0元 / 折扣价： 0 元

This specification establishes nationally recognized performance requirements for portable gasoline, kerosene, and diesel fueling systems intended for reuse by the consumer in filling, transport, dispensing, and storage. This specification defines performance requirements for systems that can effectively reduce fuel spillage and emissions when used in accordance with the manufacturer's (marked) warnings, operating instructions, and limitations of use. Permeability, flow rate, and fill level shall conform to the requirements specified. Spout samples shall be subjected to the following tests in order to determine their overall performance: leakage test, operation test, elevated temperature test, bending moment test, cyclic endurance test, pull test, closure test, drop test, immersion test, aging test, xenon arc type light exposure test, and water exposure test.1.1 This specification establishes nationally recognized performance requirements for portable gasoline, kerosene, and diesel fueling systems intended for reuse by the consumer in filling, transport, dispensing, and storage. This specification does not cover single-trip prepackaged containers.1.2 This specification defines performance requirements for systems that can effectively reduce fuel spillage and emissions when used in accordance with the manufacturer's (marked) warnings, operating instructions, and limitations of use. This specification does not provide assurance that systems meeting the requirements are suited to all fueling applications and conditions.1.3 This specification is not a fire hazard standard. It concerns portable gasoline and kerosene containers for consumer use.1.4 Containers used with these systems shall meet all applicable requirements of either Specification F 852 or F 976 and additional requirements as specified in this standard.1.5 The following precautionary caveat applies only to the test method portion, Section 5, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

定价： 0元 / 折扣价： 0 元

1.1 This consumer safety specification establishes performance requirements, test methods and marking requirements to promote safe use of soft infant and toddler carriers.1.2 This consumer safety specification is intended to minimize the risk of incidents to an infant from the normal use and reasonably foreseeable misuse of these products.1.3 For purposes of definition, a soft infant and toddler carrier is a product, normally of sewn fabric construction, which is designed to contain a full term infant to a toddler, generally in an upright position, in close proximity to the caregiver. In general, the child will weigh between 7 and 45 lb (3.2 and 22 kg). The soft infant and toddler carrier is normally “worn” by the caregiver with a child positioned in the carrier and the weight of the child and carrier suspended from one or both shoulders of the caregiver. These products may be worn on the front, side, or back of the caregiver's body with the infant either facing towards or away from the caregiver. This consumer safety specification does not include products generally referred to as “slings.”1.4 No soft infant and toddler carrier produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with the specification unless it complies with all of the requirements contained herein.1.5 This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons or objects with the caregiver and infant while the soft carrier is in use.1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.7 The following precautionary caveat pertains only to the test method portion, Section 7 of this consumer safety specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

定价： 590元 / 折扣价： 502 元 加购物车

1.1 This specification2 relates to possible hazards that may not be recognized readily by the public and that may be encountered in the normal use for which a toy is intended or after reasonably foreseeable abuse. It does not purport to cover every conceivable hazard of a particular toy. This specification does not cover product performance or quality, except as related to safety. Except for the labeling requirements pointing out the functional hazards and age range for which the toy is intended, this specification has no requirements for those aspects of a toy that present an inherent and recognized hazard as part of the function of the toy. Such an example is a sharp point necessary for the function of a needle. The needle is an inherent hazard that is well understood by the purchaser of a toy sewing kit, and this hazard is communicated to the user as part of the normal educational process.1.2 On the other hand, while a riding toy has inherent hazards associated with its use (for example, falling off onto the sidewalk), the possible hazards associated with its construction (sharp edges, exposed mechanisms, etc.) will be minimized by the application of this specification.1.3 This specification covers requirements and contains test methods for toys intended for use by children under 14 years of age. Different age limits for various requirements will be found in this specification. These limits reflect the nature of the hazards and expected mental or physical ability, or both, of a child to cope with the hazards.1.4 Articles not covered by this specification are as follows: Bicycles Tricycles Non-Powered Scooters  (see Consumer Safety Specification F2264) Recreational Powered Scooters and Pocket Bikes  (see Consumer Safety Specification F2641) Sling shots and sharp-pointed darts Playground equipment Non-powder guns Kites Hobby and craft items in which the finished item is not  primarily of play value Model kits in which the finished item is not primarily of  play value Crayons, paints, chalks, and other similar art materials in  which the material itself or the finished item is not  primarily of play value, except that all art materials,  whether or not a component of a toy, shall comply with  LHAMA, in accordance with 4.29.1 – 4.29.3. Sporting goods, camping goods, athletic equipment,  musical instruments, juvenile products, and furniture;  however, toys that are their counterparts are covered.  (It is recognized that there is often a fine line between,  for example, a musical instrument or a sporting item  and its toy counterpart. The intention of the producer  or distributor, as well as normal use and reasonably  foreseeable abuse, determines whether the item is a  toy counterpart.) Powered models of aircraft, rockets, boats, and land  vehicles; however, toys that are their counterparts are  covered. Constant air inflatables1.5 General guidelines for age labeling toys and toy packaging are contained in Annex A1.1.6 Information regarding packaging and shipping is contained in Annex A2.1.7 This consumer safety specification includes the following sections:Title Section 1Referenced Documents 2Terminology 3Safety Requirements 4 Material Quality 4.1 Flammability 4.2 Toxicology 4.3 Electrical/Thermal Energy 4.4 Sound-producing Toys 4.5 Small Objects 4.6 Accessible Edges 4.7 Projections 4.8 Accessible Points 4.9 Wires or Rods 4.10 Nails and Fasteners 4.11 Plastic Film 4.12 Folding Mechanisms and Hinges 4.13 Cords, Straps, and Elastics 4.14 Stability and Over-load Requirements 4.15 Confined Spaces 4.16 Wheels, Tires, and Axles 4.17 Holes, Clearance, and Accessibility of Mechanisms 4.18 Simulated Protective Devices 4.19 Pacifiers 4.20 Projectile Toys 4.21 Teethers and Teething Toys 4.22 Rattles 4.23 Squeeze Toys 4.24 Battery-operated Toys 4.25 Toys Intended to be Attached to a Crib       or Playpen 4.26 Stuffed and Beanbag-type Toys 4.27 Stroller and Carriage Toys 4.28 Art Materials 4.29 Toy Gun Marking 4.30 Balloons 4.31 Certain Toys with Nearly Spherical Ends 4.32 Marbles 4.33 Balls 4.34 Pompoms 4.35 Hemispheric-shaped Objects 4.36 Yo Yo Elastic Tether Toys 4.37 Magnets 4.38 Jaw Entrapment in Handles and Steering Wheels 4.39 Expanding Materials 4.40 Toy Chests 4.41Labeling Requirements 5Instructional Literature 6Producer's Markings 7Test Methods 8 General 8.1 Testing for Hazardous Substance Content 8.2 Test Methods for Determination of Heavy Element  Content in Toys, Toy Components, and Materials 8.3 Tests for Cleanliness and Preservative Effectiveness 8.4 Normal Use Testing 8.5 Abuse Testing 8.6 Impact Tests 8.7 Torque Tests for Removal of Components 8.8 Tension Test for Removal of Components 8.9 Compression Test 8.10 Tests for Tire Removal and Snap-in Wheel and     Axle Assembly Removal 8.11 Flexure Test 8.12 Test for Mouth-actuated Toys and Mouth-actuated Projectile    Toys 8.13 Projectiles 8.14  Test for Stability of Ride-on Toys or Toy Seats 8.15  Pompoms 8.16 Stalled Motor Test for Battery-operated Toys 8.17 Tests for Battery-Powered Ride-on Toys 8.18  Test for Toys that Contain Secondary Cells or Batteries 8.19 Tests for Toys which Produce Sound 8.20 Dynamic Strength Test for Wheeled Ride-on Toys 8.21 Plastic Film Thickness 8.22 Test for Loops and Cords 8.23 Yo Yo Elastic Tether Toy Test Methods 8.24 Magnet Test Methods 8.25 Test Methods for Locking Mechanisms or     Other Means 8.26  Tests for Toy Chest Lids and Closures 8.27  Test for Overload of Ride-on Toys and Toy Seats 8.28  Stuffing Materials Evaluation 8.29  Expanding Materials – Test Method 8.30Identification 9Age Grading Guidelines Annex A1Packaging and Shipping Annex A2Design Guidelines for Toys Attached to Cribs     or Playpens Annex A3Design Guidelines for Bath Toy Projections Annex A4Flammability Testing Procedure for Solids and Soft Toys Annex A5Flammability Testing Procedure for Fabrics Annex A6Compositing Procedure for Total Heavy Metal Analysis Annex A7Design Guidelines for Battery Operated Toys Annex A8Rationale for 2007 Revisions Annex A9Rationale for 2008 Revisions Annex A10Rationale for 2011 Revisions Annex A11Rationale for 2016 Revisions Annex A12Rationale for 2017 Revisions Annex A13Rationale for 2023 Revisions Annex A141.8 The values stated first are to be regarded as the standard. The values given in parentheses are for information only.1.9 The following precautionary statement pertains only to the test methods portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 1058元 / 折扣价： 900 元 加购物车

4.1 This guide is intended to apply in conjunction with applicable end-product specific performance or design standard requirements to address the overall system safety of a connected consumer product. Designers and manufacturers of a connected consumer product, with assistance from conformity assessment bodies, or others, as deemed desirable, should identify applicable and relevant product standards. They should assess and document if or how connectivity potentially affects the ability of such products to meet overall product-safety requirements, as well as conflicts or requirements, if any, that may or should not be applicable to the connected consumer product. This guide recognizes that the overall system safety of the connected consumer product is the primary objective. Property damage, including non-functionality of the connected consumer product, is only included to the extent that such property damage poses a risk of personal injury. Data security beyond the extent necessary to ensure system safety, or privacy-related issues, are not addressed in this guide although measures to address the protection of personal information may help mitigate connected consumer product safety issues.4.2 This guide provides guidelines for:4.2.1 Remote updates;4.2.2 Software, firmware, and configuration risk management designed to ensure compliance with an end product safety standard and to prevent the creation of an unanticipated hazard from the connected consumer product; and4.2.3 Cybersecurity risk controls for the software, firmware, and configuration of architecture and design.1.1 This guide provides guidance for connected consumer products, as defined in 1.1.1, as it relates to physical product safety hazards created by virtue of their connectivity. It applies to connected products that need testing and evaluation to prevent cybersecurity vulnerabilities and weaknesses that could compromise the safety-related performance of the product, create a physical safety hazard in the product or its operation, or result in a noncompliance to the underlying end product safety standard.1.1.1 Connected consumer product or Internet of Things (IoT) consumer device means any consumer device or physical object that is capable of connecting to the internet or other network, directly or indirectly, and is assigned an internet, Bluetooth, or other communication protocol address or identifier. A non-exhaustive list of examples includes:1.1.1.1 Connected children’s products such as toys and juvenile products such as baby monitors;1.1.1.2 Connected safety-related products such as smoke alarms and door locks;1.1.1.3 Connected TVs and speakers;1.1.1.4 Wearable connected health trackers and smart apparel;1.1.1.5 Connected home automation, security or surveillance cameras, and alarm systems;1.1.1.6 Connected appliances (for example, washing machines and refrigerators); and1.1.1.7 Connected smart home assistants.1.2 Safety, for this guide, is defined as the freedom from an unreasonable risk of physical injury or illness resulting from mechanical contact, hazardous energy release, or exposure to hazardous chemicals from the connected product. Physical injury or illness may include burns, lacerations, strains, contusions, suffocation, strangulation, poisoning, disease, seizures, internal injuries, shock, or other injuries to the body. Property damage related to non-functionality of the connected device is only included to the extent that such property damage leads to a safety issue. Safety, for this standard, does not include privacy or personal data security, or physical harms potentially resulting from privacy or personal data breaches.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 590元 / 折扣价： 502 元 加购物车

This consumer safety specification establishes the design requirements for the corner post extensions of full-size and non-full-size baby cribs to minimize the potential for strangulation of infants and young children who may attempt to climb out of the crib. It also provides the required information to be included in the instructions furnished with these cribs regarding the potential hazards to children wearing pacifiers, necklaces, or any other items around their necks.1.1 This consumer safety specification establishes design requirements for corner posts of full-size and non-full-size baby cribs (Note 1) to minimize the potential for strangulation of infants and young children who may attempt to climb out of the crib. It also provides information in the instructions furnished with cribs of the potential hazard to children wearing pacifiers, necklaces, or any other items around their necks.Note 1-The terms "full-size" and "non-full-size" cribs are those used in the mandatory requirements for these products that were promulgated by the U.S. Consumer Product Safety Commission and published in the Code of Federal Regulations as 16 CFR Parts 1508 and 1509.

定价： 0元 / 折扣价： 0 元

1.1 This consumer safety specification establishes safety performance requirements, test methods, and labeling requirements to minimize the hazards to infants presented by infant inclined sleep products as identified in the introduction.1.2 This consumer safety specification is intended to minimize the risk of injuries to infants resulting from normal use and reasonably foreseeable misuse or abuse of infant inclined sleep products.1.3 This consumer safety performance specification covers a free standing product with an inclined sleep surface primarily intended and marketed to provide sleeping accommodations for an infant up to 5 months old or when the infant begins to roll over or pull up on sides, whichever comes first. It also covers a smaller product intended for newborns up to 3 months old or when newborn begins to wiggle out of position or turn over in the product or weighs more than 15 lb (6.8 kg), whichever comes first. It also covers infant and newborn inclined sleep product accessories, which are attached to, or supported by, another product with the same age or abilities, or both, as the free standing products. If the inclined sleep product can be converted into a product for which another ASTM standard consumer safety specification exists, the product shall meet the applicable requirements of that standard. For example, an inclined sleep product that can have the recline angle adjusted below 10° shall also comply with the applicable requirements of Consumer Safety Specification F2194.1.4 No infant inclined sleep product produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein.1.5 The following precautionary caveat pertains only to the test method portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 0元 / 折扣价： 0 元

1.1 This guide relates to the use and maintenance of commercially manufactured fun-karts intended for private use, on suitable off-road terrain, by consumers.1.2 This guide is intended to reduce hazards, other than those inherent in the sport of fun-karting, to the users of fun-karts during normal intended use.1.3 This guide applies to fun-karts for private use and does not apply to concession, race, home-made, consumer-modified karts, karts that are pedal-powered, unpowered karts, or karts that are used for commercial purposes.1.4 This guide specifically recognizes that there are operational hazards relating to fun-karts that operators and passengers are deemed to have accepted by their use and operation of the fun-kart including, but not limited to, falling out, running into, through, under or over objects, upsetting the kart, general operator recklessness, pinches, scratches, or bruises, or a combination thereof.1.5 This guide does not cover product performance or quality, labeling, maintenance, or safety devices.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 515元 / 折扣价： 438 元 加购物车

This specification deals with nationally recognized requirements for the cautionary information to be placed on the label of portable kerosine and diesel containers for consumer use. It is not the intent of this specification to preclude any other labeling requirements, such as those set forth in Federal Hazardous Substances Act (FHSA) or other applicable regulations and standards. Information on warning labels which appear on the containers will help ensure the proper information is being presented to the consumer, concerning methods of handling kerosine and diesel fuels.1.1 This specification establishes nationally recognized requirements for the cautionary information to be placed on the label of portable kerosine and diesel containers for consumer use. It is not the intent of this specification to preclude any other labeling requirements, such as those set forth in Federal Hazardous Substances Act (FHSA) or other applicable regulations and standards.

定价： 0元 / 折扣价： 0 元

This safety specification covers the performance and safety requirements intended to reduce the potential hazards associated with the manufacture and assembly of components, maintenance, use, and labeling of consumer trampoline enclosures. This specification is applicable to trampoline enclosures to be sold as an accessory to or packaged with trampolines of a minimum bed size of 3300 in.2 (2.1 m2); a minimum height of 20 in. (510 mm); intended for the purpose of continuous, vertical jumping activities; and intended for consumer use.1.1 This safety specification covers the components, assembly, use, labeling, and performance requirements of consumer trampoline enclosures (see Safety Specification F381).1.2 This specification is applicable to trampoline enclosures to be sold as an accessory to or packaged with trampolines of (1) a minimum bed size of 3300 in.2 (2.1 m2), (2) a minimum height of 20 in. (510 mm), (3) intended for the purpose of continuous, vertical jumping activities, and (4) intended for consumer use.1.3 This specification includes the following sections and selected subsections:  Section 1Referenced Documents 2Terminology 3Components 4General Requirements 5Performance Requirements 6Performance Tests 6Information Packet 7Product Marking 8Packaging and Package Marking 91.4 This specification does not purport to address all of the hazards that may be associated with trampolines or trampoline enclosures, or both. The standard’s existence alone will not necessarily prevent injuries. Like other physical activities, trampoline use involves the risk of injury, particularly if the equipment is used improperly. Similarly, the use of a trampoline enclosure alone will not necessarily prevent all injuries.1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.6 The following precautionary caveat pertains only to the test methods portion of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 590元 / 折扣价： 502 元 加购物车

This consumer safety specification is intended to address incidents reported by the U.S. Consumer Product Safety Commission (CPSC) relating to frame child carriers. In response to the incident data compiled by the CPSC, this consumer safety specification attempts to minimize the hazards associated with these products from the following: occupant retention, structural integrity, and deficiency of consumer education regarding product use. This consumer safety specification is intended to deal with reasonably foreseeable use and misuse of the products. Performance requirements of the frame child carriers shall be determined by subjecting them to the following tests: leg opening test, dynamic strength test, static load test, stability test, locking device test, unintentional folding test, and removal of protective components test such as torque test and tension test. Instructions shall be provided with the product and shall be easy to read and understand. Instructions for assembly, use, maintenance, and cleaning of the product, and warnings, where applicable, shall be included.1.1 This consumer safety specification covers performance requirements, test methods, and marking requirements to promote safe use of frame child carriers.1.2 This consumer safety specification is intended to minimize the risk of injury to a child from the normal use and reasonably foreseeable misuse of these products.1.3 For the purposes of this consumer safety specification, a frame child carrier is a product, normally of sewn fabric construction on a tubular metal or other frame, which is designed to carry a child, in an upright position, on the back of the caregiver. A frame child carrier is intended for use with a child that is able to sit upright unassisted and weighs between 16 lb and 50 lb (7.3 kg and 22.7 kg). The frame child carrier is intended to be worn on the back of the caregiver’s body, with the carrier, and thus the child, suspended from both shoulders of the caregiver. The seated position of the child is either facing towards or away from the caregiver.1.4 No frame child carrier produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with the specification unless it complies with all of the requirements contained herein.1.5 This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons or objects with the caregiver and child while the frame child carrier is in use.1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.7 The following precautionary caveat pertains only to the test method portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 646元 / 折扣价： 550 元 加购物车