微信公众号随时随地查标准

QQ交流1群(已满)

QQ群标准在线咨询2

QQ交流2群

购买标准后,可去我的标准下载或阅读

This practice covers the instructions a kit producer must provide to a consumer in order to assemble and safely flight-test a recreational aircraft to ensure compliance with applicable ASTM standards. The instructions prescribe the necessary mechanical skills or training, or both, required for successful completion of the kit, as well as necessary tooling, fixtures, inspections, measurements, and other pertinent items required for successful completion of the kit. The kit assembly instructions (KAI) shall include at least the following information: (1) Revisions; (2) Introduction and instructions for using the KAI; (3) Table of Contents; (4) Safety Summary; (5) Applicable standards and specifications; (6) Terminology; (7) Required consumer abilities and responsibilities; (8) Required equipment and environmental conditions; (9) Parts list; (10) Assembly operations; (11) Final assembly Inspections; (12) Flight-test procedures; and (13) Additional requirements.1.1 This practice covers the instructions a kit producer must provide to a consumer in order to assemble and safely flight-test a recreational aircraft to ensure compliance with applicable ASTM standards.1.2 The instructions prescribe the necessary mechanical skills or training, or both, required for successful completion of the kit, as well as necessary tooling, fixtures, inspections, measurements, and other pertinent items required for successful completion of the kit. Proof of compliance with these instructions may be vital for obtaining flight authorizations from the applicable CAA.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

定价: 515元 / 折扣价: 438 加购物车

在线阅读 收 藏

4.1 This guide provides symbols and a system for their use by which care instructions for textile products can be conveyed in a simple, space-saving, and easily understood pictorial format that is not language dependent. See also ADJD5489-E-PDF. Currently, the FTC Care Labeling Rule recognizes Guide D5489-96c.4.2 Care symbols are an important means for identifying the appropriate care procedure for home laundering, commercial laundering, professional textile care, and coin-operated drycleaning, of textile products.4.3 Care labeling using symbols can be used by the purchaser to select textiles on the basis of the care method required without knowledge of the language. The FTC Care Labeling Rule specifies Guide D5489-96c symbols. Additional changes in words and symbols have been added to this guide which are not covered by 16 CFR 423. In the United States, when care symbols only are to be included in a care label, the FTC requires that the Guide D5489-96c version of symbols must be used. However, the symbols, as included in this standard version (Guide D5489-18), may be used if symbols are used in addition to full care instructions written in English wording.4.4 In countries in which a word-based care labeling system is required, the care symbol system may be used as a supplemental system.4.5 The word-based instructions for each symbol in this guide are harmonious with Terminology D123, and Terminology D3136, the United States Federal Trade Commission Care Labeling Rule, 16 CFR 423, and industry practice (see Figs. 1 and 2).FIG. 1 Commercial and Home Laundering and Professional Textile Care SymbolsNOTE 1: This figure illustrates the symbols to use for laundering and drycleaning instructions. As a minimum, laundering instructions shall include, in order, four symbols: washing, bleaching, drying, and ironing; and, professional textile care instructions shall include one symbol. Additional symbols or words may be used to clarify the instructions.FIG. 2 Guide to Order of ASTM Care Symbols4.6 The care label symbol system is based on five basic care symbols representing five operations: washing, bleaching, drying, ironing, and professional textile care.4.7 One color is used for all care symbols in this care labeling system.NOTE 1: While this symbol system uses one color, it is harmonious with tri-color systems such as the Canadian system because the instructions are clear whether printed in one or three colors.4.8 This guide does not specify the type of label material or fabric to use. However, appropriateness for consumer comfort is recommended.1.1 This guide provides a uniform system of symbols for the disclosure of care instructions on textile products such as apparel, piece goods, and household and institutional articles, hereinafter referred to as “textile,” or “textile product.”1.2 This guide provides a comprehensive system of symbols to represent care instructions reducing language-dependent care instructions.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价: 590元 / 折扣价: 502 加购物车

在线阅读 收 藏

This consumer safety specification includes requirements for safety instructions and labeling for recreational powered scooters and pocket bikes. Safety instructions shall be included with each unit and shall have the following: age and weight limit of the user, original design and configuration of the unit, operation of the unit, pre-operation checks, demonstration of unit, appropriate clothing and helmet, and maintenance. The maintenance instructions shall include: brake adjustments and service, tire inflation pressures, lubrication points including recommended lubricants, drive system specification and service instructions, frame inspection procedures, capacity by weight, maximum operating speeds, service and adjustment procedures for all components, and a phone number to secure maintenance or operating assistance from the manufacturer. Name and place of the business, manufacturer, importer, distributor, or seller shall be listed in the manual and on the retail box. Warning systems shall be in contrasting colors, permanent, conspicuous, and in sans serif style font.1.1 This consumer safety specification includes requirements for safe-use instructions and labeling to minimize the hazards to users of recreational powered scooters and pocket bikes. This specification is intended to cover safety instructions, labeling, and maintenance for products for:1.1.1 Children age eight to twelve for units limited to speeds 16 km/h (10 miles/h) or less, and1.1.2 Children age 13 and above for fast-moving units capable of achieving speeds of >16 km/h (>10 miles/h).1.2 This specification is intended to reduce hazards, other than those inherent to the users of these units during normal intended use and within manufacturers’ safety guidelines.1.3 This specification is not intended for non powered scooters (Consumer Safety Specification F2264), battery powered ride-on toys (Consumer Safety Specification F963), motorcycles, skateboards, all terrain vehicles (ATVs), go-karts (Practice F2007), fun-karts (Safety Guide F1928), snowmobiles, motorized trail bikes, lawn mowers, or motorized wheelchairs including mobility scooters.1.4 This specification is not intended for units designed for “Adult Use Only” and that are prominently labeled and marked as such.1.5 This specification is not intended for units designed or licensed for roadway use or regulated by transportation regulations (that is, Department of Transportation (DOT) or state).1.6 The values given in SI units are to be considered as the standard. The values given in parentheses are for information only.1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

定价: 0元 / 折扣价: 0

在线阅读 收 藏

1.1 These specifications cover operating instructions for glass capillary kinematic viscometers of all the types described in detail in Annex A1, Annex A2, and Annex A3 as follows:  Modified Ostwald viscometers, Annex A1  Suspended-level viscometers, Annex A2  Reverse-flow viscometers, Annex A31.2 The calibration of the viscometers is described in Section 6.1.3 This standard covers some widely used viscometers suitable for use in accordance with Test Method D445. Other viscometers of the glass capillary type which are capable of measuring kinematic viscosity within the limits of precision given in Test Method D445 may be used.1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价: 843元 / 折扣价: 717 加购物车

在线阅读 收 藏

4.1 This is a guide to help a manufacturer distributor, or importer establish a reasonable basis for care information.4.1.1 The manufacturer, distributor, or importer should possess, prior to sale, reliable evidence that the product was not harmed when refurbished reasonably often according to the instructions. Additionally, they should possess reliable evidence that the product, or a fair sample of the product, would be harmed when refurbished by methods warned against on the label.4.2 This guide is intended for general use by those who wish to evaluate whether apparel or other textile products will perform in an acceptable manner when refurbished according to particular care instructions.4.3 Refurbished products are evaluated against previously selected product specifications to determine whether the products can be refurbished successfully by following the instructions on the care label or other care instructions.1.1 This guide may be used to determine and confirm the appropriate care label instructions for apparel, piece goods, and other textile products excluding textile floor coverings and upholstery.1.2 This guide encompasses the following care procedures: home laundering, professional textile care, and other alternative cleaning methods.1.3 This guide includes provision for evaluating the complete textile product and the product components.1.4 This guide covers the performance characteristics as a result of refurbishing that are important in determining the acceptability of a textile product.1.5 This guide is appropriate for the evaluation of all garments and household textiles that are sold with care labels.1.5.1 This guide may also be used in connection with the evaluation of similar materials that do not have a care label.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价: 590元 / 折扣价: 502 加购物车

在线阅读 收 藏

4.1 This practice describes the minimum information to be provided by the manufacturer or seller to the buyer or end user related to the wearing, care, and maintenance of chemical protective clothing. Adherence to this practice allows written information to be provided with the protective clothing to purchasers by means of labels (such as labels complying with Practice F1301), pamphlets, or other documents.4.2 Not every element of this practice may be applicable to all chemical protective clothing components or configurations. It is the manufacturer’s or seller’s responsibility to determine which portions of this practice, and the corresponding requirements, are applicable to their chemical protective clothing products. For informational requirements that are not applicable because of the nature of the product and intended use, the manufacturer or seller is to indicate and describe those portions or requirements that are not applicable.4.3 All information related to wearing, decontamination, care, and maintenance are required to be written in a manner so that the end user can readily understand the details. To emphasize important limitations, bold lettering and explicit warning terminology (for example, signal words such as ‘danger,’ ‘warning,’ and ‘caution’ (described in ANSI Z535.4)) are to be used. Where possible, pictograms and illustrations are required to convey specific instructions. In addition, the use of symbols, such as those provided in the care of textile products in Guide D5489, are appropriate for indicating specific care procedures used in cleaning protective clothing where applicable.1.1 This practice describes the recommended minimum information to be conveyed by the manufacturers or sellers to buyers or end users for the wearing, care, and maintenance of chemical protective clothing.1.1.1 This practice does not cover specific instructions for how to select and when to use protective clothing or design requirements.1.1.2 This practice does not apply to protective clothing that is solely intended for protection against flame and thermal hazards.1.2 Information provided by this practice aids organizations that select and use chemical protective clothing in their implementation of requirements established in Sections 10 and 11 of Practice F1461.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价: 515元 / 折扣价: 438 加购物车

在线阅读 收 藏

4.1 This guide gives guidelines for labels and instructions to manufacturers that manufacture wrestling mats.4.2 The purpose of the labels and instructions is to help alert and remind users of important issues related to wrestling mats and their use.4.3 Limitation—This guide applies only to wrestling mats whose standard specifications are under auspices of ASTM Committee F08.1.1 This guide sets forth labeling and instruction guidelines for manufacturers of wrestling mats.1.2 This guide applies only to wrestling mats whose standard specifications are under auspices of ASTM Committee F08.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价: 515元 / 折扣价: 438 加购物车

在线阅读 收 藏
ASTM F2123-23 Standard Practice for Treestand Instructions Active 发布日期 :  1970-01-01 实施日期 : 

5.1 This practice is provided to develop and maintain uniformity in practices for instructions for treestands, climbing sticks (continuous and sectional), tripods, and towers, particularly with regard to quality assurance and safety.5.2 It is emphasized that the use of these practices will not alter the validity of data determined with specific tests related to other standards.1.1 This practice provides guidance for providing user instructions for treestands.1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价: 590元 / 折扣价: 502 加购物车

在线阅读 收 藏
8 条记录,每页 10 条,当前第 1 / 1 页 第一页 | 上一页 | 下一页 | 最末页  |     转到第   页