定价： 3674元 / 折扣价： 3123 元 加购物车

定价： 352元 / 折扣价： 300 元 加购物车

5.1 The ability of a coating to resist printing is important because its appearance is adversely affected if the smoothness of the coating film is altered by contact with another surface, particularly one with a texture. Interior paint systems, particularly gloss and semigloss on window sills and other horizontal surfaces, often have objects such as flower pots placed on them that may tend to leave a permanent impression. This tendency for a paint film to “print” is a function of the hardness of the coating, the pressure, temperature, humidity, and the duration of time that the object is in contact with the painted surface.1.1 This test method covers an accelerated procedure for evaluating the print resistance of architectural paints. It differs from print resistance Test Method D2091 in that the latter is concerned with lacquer finishes under packaging, shipping, and warehousing conditions, whereas this test method is concerned with decorative coatings undergoing random on-site pressure contact.NOTE 1: Printing should not be confused with blocking, which is measured in Test Method D4946. The former relates to the indentation of a surface, and the latter, the sticking together of two surfaces.1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 515元 / 折扣价： 438 元 加购物车

3.1 A common set of definitions is essential to improve communication and avoid misunderstanding among ink makers, substrate makers, and printers.3.2 The term “paper” in this standard also encompasses the term “paperboard.”3.3 Definitions that are verbatim from one of the referenced sources are indicated by giving the acronym of the organization or the author of the book at the end of the definition.1.1 This terminology standard gives definitions for problems that develop with printed matter as a result of deficiencies in the ink, substrate, press, or combinations thereof.1.2 These definitions cover the three major printing processes and are given in the following sequence: lithography, flexography, and gravure. For further information see Refs (1-4) at the end of this standard.1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 590元 / 折扣价： 502 元 加购物车

4.1 An unsatisfactory appearance can result from pressure deformation of a film inherently too soft or containing residual solvent. This test method is primarily used to evaluate the resistance of a lacquer finish to printing under the conditions of packaging, shipping, and warehousing.1.1 This test method covers the resistance of dried lacquer films to imprinting.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 515元 / 折扣价： 438 元 加购物车

5.1 The procedure described in this document is in accordance with current SWGFAST guidelines (6), as well as National Institute of Standards and Technology (NIST) standard (7), which specify 1000 pixels per inch (ppi) at 1:1 as the minimum scanning resolution for latent print evidence. This standard appears primarily to be historical and directed towards scanners, rather than cameras, though recent studies suggest that it is suitable for capturing Level 3 detail (8).5.2 While the 1000 ppi resolution standard permits the capture of level three detail in latent prints, it does not mean that any image recorded at a lower resolution would necessarily be of no value for comparison purposes. Such an image could have captured level two details sufficiently for comparison. However, there are some latent print impressions that are so degraded or contain such limited quantity of information that at least 1000 ppi resolution is required to conduct an accurate examination. Some automated fingerprint identification systems require 1000 ppi for submission purposes. The relationship between machine (optical) resolution and achievable resolution (sometimes called resolving power) can vary greatly by manufacturer (8).1.1 This practice provides recommendations on the resolving power that enables recording of Level 3 details of latent print evidence that are suitable for comparison purposes using a digital camera, a flatbed scanner, or other image capture device. These recommendations take into consideration the minimum resolution requirements for utilizing the photographs for comparison.1.2 This practice describes procedures that can be used to verify the resolving power of such imaging systems and recommends equipment to be used.1.3 Certain commercial equipment, instruments, or materials are used in this document as representative examples to more clearly explain the procedures. Such use does not imply a recommendation or endorsement.1.4 This standard is intended for use by competent forensic science practitioners with the requisite formal education, discipline-specific training (see Practice E2917), and demonstrated proficiency to perform forensic casework.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 590元 / 折扣价： 502 元 加购物车