微信公众号随时随地查标准

QQ交流1群(已满)

QQ群标准在线咨询2

QQ交流2群

购买标准后,可去我的标准下载或阅读

1.1 This specification covers requirements and contains test methods for outdoor recreational camping tents for persons. These requirements include controlled small flame test methods for materials used to manufacture tents. The requirements are intended to specify materials that do not present an unreasonable risk of flammability and injury to occupants.1.2 This specification does not apply to products intended for indoor use only, products that are not intended to shelter people, products used principally for commercial purposes only, or products subject to the requirements of the NFPA Fire Code (NFPA 1), NFPA Life Safety Code (NFPA 101), or the International Fire Code, as adopted by certain U.S. states. Additional articles not covered by this specification are:1.2.1 Baby boat with sunshade;1.2.2 Bivouac sack;1.2.3 Car port;1.2.4 Children’s indoor play tent, toy tent, toy bed canopy, and similar products;1.2.5 Garden green house;1.2.6 Hammock, hammock with insect nets, hammock with shades, hammock shelter, and similar products;1.2.7 Packaging material, such as tent bags, pole bags, bivouac sacks, stake bags, carrying bags or rope, shock cord, or cordage material used for anchoring;1.2.8 Tarp cover;1.2.9 Sun or beach umbrella with or without a sidewall; and1.2.10 Other similar items that are not primarily designed to provide shelter to persons for outdoor use, which do not have sides which are fully enclosed to the ground, and which do not have limited means of egress.1.3 This performance specification relies on test methods from (established) consensus flammability test standards for outdoor recreational camping tents, specifically Sections 2-5 of CAN/CGSB-182.1.1.4 This consumer safety specification is intended to deal with reasonably foreseeable use and misuse of the products. This consumer safety specification does not apply to products that are blatantly misused, nor does it apply to products used by consumers in a careless manner that violate normal practice or disregard the instructions or warnings provided with the product or both.1.5 This specification is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.1.6 This specification is used to predict or provide a quantitative measure of the fire hazard from a specified set of fire conditions involving specific materials, products, or assemblies. This assessment does not necessarily predict the hazard of actual fires that involve conditions other than those assumed in the analysis.1.7 This specification is used to establish a means of combining the potential for harm in fire scenarios with the probabilities of occurrence of those scenarios. Assessment of fire risk using this specification depends on many factors, including the manner in which the user selects scenarios and uses them to represent all scenarios relevant to the application. This specification cannot be used to assess fire risk if any conditions are different from those contained in this specification.1.8 This specification revises CPAI-84, Specification for Flame-Resistant Materials Used in Camping Tentage as it relates to recreational camping tents.21.9 Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard.1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.11 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价: 590元 / 折扣价: 502 加购物车

在线阅读 收 藏

4.1 These warnings are intended as preventive measures against the most commonly reported hazards of which the subcommittee is aware.4.2 A permanent warning label shall be affixed to all tents and to all bivouac sacks. The label shall be designed to be legible, clearly visible and unobstructed throughout the life of the tent.4.3 Whether the warning statements in Fig. 1A or those in Fig. 1B are to be used for a tent will depend on whether the tent is marketed as acceptable for the use of camping appliances within them and shall be determined by a review of publicly available marketing materials, images and the manufacturer’s written instructions and user manual.FIG. 1 A Label for Tents for Use Without Camping Appliances (Ref: Specification F3431)FIG. 1 B Label for Tents for Use With Camping Appliances (Ref: Specification F3431) (continued)1.1 This practice establishes requirements for warnings and other information that shall be permanently affixed to recreational camping tents and bivouac sacks.1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价: 590元 / 折扣价: 502 加购物车

在线阅读 收 藏
2 条记录,每页 10 条,当前第 1 / 1 页 第一页 | 上一页 | 下一页 | 最末页  |     转到第   页