
【国外标准】 Standard Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 This standard provides a specification for elemental impurity limits in erosion control products used for land application. Erosion control products may include but are not limited to: hydraulically-applied erosion control products, rolled erosion control products, sediment retention devices, gabions and mattresses, and articulated concrete block revetments.1.2 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3 All observed and calculated values shall conform to the guidelines for significant digits and rounding established in Practice D6026, unless superseded by this specification.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D8082-18
标准名称:
Standard Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application
英文名称:
Standard Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ASTM D8081-17(2021)e1 Standard Guide for Theory and Principles for Obtaining Reliable and Accurate Bulk Solids Flow Data Using a Direct Shear Cell
- 下一篇: ASTM D8083-16(2023) Standard Test Method for Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection
- 推荐标准
- ASTM D5793-18(2022) Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings
- ASTM D5794-95(2021) Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography
- ASTM D5798-21 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
- ASTM D5800-21 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
- ASTM D5801-24 Standard Test Method for Toughness and Tenacity of Asphalt Materials
- ASTM D5805-00(2023) Standard Test Methods for Rubber—Determination of Carbon Black in Masterbatches
- ASTM D5806-95(2017) Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration
- ASTM D5807-18 Standard Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions
- ASTM D5810-96(2021) Standard Guide for Spiking into Aqueous Samples
- ASTM D5811-20 Standard Test Method for Strontium-90 in Water
- ASTM D5814-23 Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
- ASTM D5817-20 Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing
- ASTM D5821-13(2017) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
- ASTM D5822-13(2019) Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
- ASTM D5823-19(2024) Standard Test Method for Tuft Height of Pile Floor Coverings