
【国外标准】 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 These test methods for the chemical analysis of metals and alloys are primarily intended to test such materials for compliance with compositional specifications. It is assumed that all who use these test methods will be trained analysts, capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory.1.1 These test methods cover the determination of carbon, sulfur, nitrogen, and oxygen, in steel, iron, nickel, and cobalt alloys having chemical compositions within the following limits:Element Mass Fraction Range, %Aluminum 0.001 to 18.00Antimony 0.002 to 0.03Arsenic 0.0005 to 0.10Beryllium 0.001 to 0.05Bismuth 0.001 to 0.50Boron 0.0005 to 1.00Cadmium 0.001 to 0.005Calcium 0.001 to 0.05Carbon 0.001 to 4.50Cerium 0.005 to 0.05Chromium 0.005 to 35.00Cobalt 0.01 to 75.0Niobium 0.002 to 6.00Copper 0.005 to 10.00Hydrogen 0.0001 to 0.0030Iron 0.01 to 100.0Lead 0.001 to 0.50Magnesium 0.001 to 0.05Manganese 0.01 to 20.0Molybdenum 0.002 to 30.00Nickel 0.005 to 84.00Nitrogen 0.0005 to 0.50Oxygen 0.0005 to 0.03Phosphorus 0.001 to 0.90Selenium 0.001 to 0.50Silicon 0.001 to 6.00Sulfur 0.002 to 0.35Tantalum 0.001 to 10.00Tellurium 0.001 to 0.35Tin 0.002 to 0.35Titanium 0.002 to 5.00Tungsten 0.005 to 21.00Vanadium 0.005 to 5.50Zinc 0.005 to 0.20Zirconium 0.005 to 2.5001.2 The test methods appear in the following order: SectionsCarbon, Total, by the Combustion and Infrared Absorption or Thermal Conductivity Detection Test Method 10 – 20 Nitrogen by the Inert Gas Fusion and Thermal Conductivity Detection Test Method 32 – 42 Oxygen by the Inert Gas Fusion and Infrared Absorption or Thermal Conductivity Detection Test Method 43 – 54 Sulfur by the Combustion-Infrared Absorption Detection Test Method 55 – 65 Sulfur by the Combustion–Infrared Absorption Test Method (Potassium Sulfate Calibration) – Discontinued 2018 21 – 311.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 6.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E1019-18
标准名称:
Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
英文名称:
Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 1019-1985 Internal combustion engines - Spark emission control devices
- AS 1019-2000 Internal combustion engines - Spark emission control devices
- AS 1085.18-2003 (R2013) Railway track material Screw spikes and threaded inserts
- AS 1418.18-2001/Amdt 1-2003 Cranes, hoists and winches Crane runways and monorails
- AS 1807.18-1989 Cleanrooms, workstations and safety cabinets - Methods of test Determination of vibration in workstations and safety cabinets
- AS 1807.18-2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of vibration in workstations, safety cabinets and pharmaceutical isolators
- AS 2341.18-1992 Methods of testing bituminous and related roadmaking products Determination of softening point (ring and ball method)
- AS 2362.18-1993 Automatic fire detection and alarm systems - Methods of test for actuating devices Air velocity stability test
- ASTM D6099-18 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
- ASTM D610-08(2019) Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
- ASTM D6100-17 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
- ASTM D6104-97(2017)e1 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
- ASTM D6105-04(2019) Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
- ASTM D6107-97(2023) Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
- ASTM D6108-19 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes