
【国外标准】 Standard Specification for Freezers, Ice Cream, Soft Serve, Shake
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This specification covers the design, performance, and certification requirements pertinent to the construction of commercial ice cream, soft serve, and shake freezers that freeze and dispense frozen products (dairy, yogurt, custard, etc.) on a continuous basis. The ice cream freezers are classified into types according to frozen product produced, groups according to number of cylinders, styles according to mountability, classes according to condenser type, and grades freezing mechanism, as follows: Type I—soft-serve freezer; Type II—shake freezer; and Type III—combination soft-serve and shake freezer; Group 1—one freezing cylinder; Group 2—two freezing cylinders; Group 3—three freezing cylinders; and Group 4—four freezing cylinders; Style 1—floor mounted; and Style 2—countertop; Class 1—air-cooled condenser; Class 2—liquid-cooled condenser; and Class 3—remote air-cooled condenser; Grade 1—conventional nonheat-treatment freezer; and Grade 2—heat-treatment freezer. The freezers shall conform to electrical, steel fabrication, lubrication, interchangeability, refrigerant, insulation, and other performance and operational requirements, and should function satisfactorily as specified.1.1 This specification covers commercial ice cream, soft serve, and shake freezers, which freeze and dispense frozen product (dairy, yogurt, custard, etc.) on a continuous basis. Included in this specification are conventional and heat-treatment freezers.1.2 Equipment covered under this specification may contain a substance (or be manufactured with a substance) that harms public health and environment by destroying ozone in the upper atmosphere. This specification does not purport to address environmental regulations. It is the responsibility of the user of this standard to comply with environmental regulations (see 7.5).1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F1604-15(2020)e1
标准名称:
Standard Specification for Freezers, Ice Cream, Soft Serve, Shake
英文名称:
Standard Specification for Freezers, Ice Cream, Soft Serve, Shake标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM E2102-21 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
- ASTM E2103/E2103M-19 Standard Classification for Bridge Elements—UNIFORMAT II
- ASTM E2104-22 Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components
- ASTM E2106-00(2019) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
- ASTM E2107-20 Standard Practice for Environmental Regulatory Compliance Audits
- ASTM E2108-16 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
- ASTM E2109-01(2021) Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
- ASTM E211-82(2022) Standard Specification for Cover Glasses and Glass Slides for Use in Microscopy
- ASTM E2110-17 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
- ASTM E2112-23 Standard Practice for Installation of Exterior Windows, Doors and Skylights
- ASTM E2113-23 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
- ASTM E2114-23 Standard Terminology for Sustainability
- ASTM E2115-22 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
- ASTM E2121-21 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
- ASTM E2122-22 Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves