- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- ASTM >>
- ASTM D8330-20 Standard Specification for Artists’ Pastels

【国外标准】 Standard Specification for Artists’ Pastels
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 This specification establishes quality requirements and provides a basis for common understanding among producers, distributors, and users.4.2 It is not intended that all pastels meeting the requirements be identical nor of uniform excellence in all respects. Variations in manufacture, not covered by this specification, may cause some artists to prefer one brand to another, either of which may be acceptable under this specification.4.3 Variation in test results can be due to differences in pigment manufacture from time to time by a company, different properties of a pigment from company to company, different combinations of pigments and other ingredients, specimen preparation, thickness of pastel on substrate, different instruments and instrumental readings, variations in the surface of the specimen, and the conditions of exposure. Allowance for these variations is made by establishing lightfastness categories that include a range of color differences.4.4 Since a specific pastel may be unusually sensitive to some aspect of simulated daylight accelerated lightfastness testing and show a change in color that would not occur in a normal home or gallery environment, two types of exposure are required, both natural daylight and simulated daylight.4.5 Some variation in test results is to be expected even when the same type of exposure is repeated. Therefore, after triplicate specimens are exposed in each of the two types of exposures, the lightfastness category of the pastel by each exposure method is based on the mean of the color change of the three specimens, or two specimens if an outlier is discarded.4.6 If the two methods place the pastel in the same lightfastness category, the pastel is assigned to that category. If the pastel is placed in different lightfastness categories by the two methods, either the pastel is placed in the poorer of the two categories or a retest is conducted using the test method that yielded the poorer lightfastness category. The lightfastness category by that test method is based on the mean of the color change of the specimens in both the original and retest that had not been discarded as outliers.1.1 This specification establishes requirements for composition, performance, and labeling of artists' pastels.1.2 This specification includes requirements for identification and lightfastness.1.3 Pastel specimens are exposed to both natural daylight through window glass and window glass-filtered simulated daylight radiation to determine the lightfastness category for each pastel.1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D8330-20
标准名称:
Standard Specification for Artists’ Pastels
英文名称:
Standard Specification for Artists’ Pastels标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ASTM D8329-21 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Material Contained Within
- 下一篇: ASTM D8331/D8331M-20 Standard Test Method for Measurement of Film Thickness of Thin-Film Coatings by Non-Destructive Means Using Ruggedized Optical Interference
- 推荐标准
- ASTM E3168-20a Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters
- ASTM E317-21 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments
- ASTM E3170/E3170M-18(2023) Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints
- ASTM E3171-21a Standard Test Method for Determination of Total Silver in Textiles by ICP-OES or ICP-MS Analysis
- ASTM E3178-18 Standard Practice for Evaluating Static and Cidal Chemical Decontaminants against Bacillus Spores using Centrifugal Filtration Tubes
- ASTM E3182-20 Standard Practice for Preparing an Occupant Exposure Screening Report (OESR) for Substances in Installed Building Products
- ASTM E3186-19 Standard Guide for Use and Testing of Dry-Block Temperature Calibrators
- ASTM E3191-18 Standard Specification for Permanent Foaming Fixatives Used to Mitigate Spread of Radioactive Contamination
- ASTM E3192/E3192M-20 Standard Practice for Soft Armor Conditioning by Tumbling
- ASTM E3197-23 Standard Terminology Relating to Examination of Fire Debris
- ASTM E3199-22a Standard Guide for Alternative Allocation Approaches to Modeling Input and Output Flows of Secondary Materials and Related Recycling Scenarios in Life Cycle Assessment
- ASTM E3200-21 Standard Guide for Investment Analysis in Environmentally Sustainable Manufacturing
- ASTM E3208-20 Standard Specification for Minimum Equipment Requirements for Mobile Surface Contaminant Classification and Measurement Equipment
- ASTM E3209/E3209M-20 Standard Test Method for Pavement Thickness by Magnetic Pulse Induction
- ASTM E321-20 Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)