【国外标准】 Standard Specification for Shipboard Incinerators

This specification covers the design, manufacture, performance, operation, functioning, and testing of incinerators intended to incinerate garbage and other shipboard wastes generated during the ship’s normal service (that is, maintenance, operational, domestic, and cargo-associated wastes). An operating test method for the prototype of each design shall be conducted, with a test report completed indicating results of all test methods. The test methods shall be conducted to ensure that all of the control components have been properly installed and that all parts of the incinerator, including controls and safety devices, are in satisfactory operating condition. For each unit, if preassembled, an operating test method shall be conducted to ensure that all of the control components have been properly installed and that all parts of the incinerator, including controls and safety devices, are in satisfactory operating condition. After installation, an operating test method shall be done to all control and safety devices such as flame safeguard, oil pressure limit control, air pressure limit control, other interlocks, combustion control, programming controls, fuel supply controls, and switches.1.1 This specification covers the design, manufacture, performance, operation, functioning, and testing of incinerators intended to incinerate garbage and other shipboard wastes generated during the ship’s normal service (that is, maintenance, operational, domestic, and cargo-associated wastes).1.2 This specification is a companion document to Guide F1322.1.3 This specification applies to those incinerator plants with capacities up to 4000 kW per unit.1.4 Additional information is given in Appendix X1 – Appendix X8.1.5 This specification does not apply to systems on special incinerator ships, for example, for burning industrial wastes such as chemicals, manufacturing residues, and so forth.1.6 This specification does not address the electrical supply to the unit nor the foundation connections and stack connections.1.7 It is possible that this standard will involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. If an incinerator is to be operated in coastal regions, the strictest governing regulations for those countries in which the incinerator would potentially operate would form the requirement basis.1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.