
【国外标准】 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 This test method is useful in research and development for comparison of creep properties of adhesives, particularly as those properties are affected by changes in adhesive formulation or expected service conditions, including temperature, moisture level, and duration of loading.4.2 The relative size and simplicity of design of the spring-loaded apparatus permits easy portability and transfer from one environment to the next without disturbing static loads.4.3 The relative simplicity of design with inexpensive materials permits replication of creep tests at relatively low costs.1.1 This test method covers the determination of the creep properties of adhesives for bonding metals when tested on a standard specimen and subjected to certain conditions of temperature and tensile stress in a spring-loaded testing apparatus.1.2 This test method is applicable to the temperature range from −55 to +260°C (−67 to +500°F).1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM D2294-96(2016)
标准名称:
Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
英文名称:
Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM A646/A646M-17(2022) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
- ASTM A648-18 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
- ASTM A649/A649M-10(2020) Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
- ASTM A650/A650M-18 Standard Specification for Tin Mill Products, Black Plate, Double Reduced
- ASTM A660/A660M-21 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
- ASTM A662/A662M-17 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
- ASTM A663/A663M-23 Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
- ASTM A666-23 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
- ASTM A668/A668M-23 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
- ASTM A673/A673M-17 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
- ASTM A677-16(2023) Standard Specification for Nonoriented Electrical Steel Fully Processed Types
- ASTM A681-08(2022) Standard Specification for Tool Steels Alloy
- ASTM A683-16(2023) Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
- ASTM A693-22 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- ASTM A694/A694M-16(2022) Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service