
【国外标准】 Standard Practice for Referencing Suprathreshold Odor Intensity
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
AbstractThese practices are designed to outline two preferred procedures for referencing the odor intensities of any odorous material in the suprathreshold region on the ASTM Odor Intensity Referencing Scale. The method by which the reference odorant vapors are to be presented for evaluation by a panel of at least eight independent judgments is specified, but the manner by which the test sample is presented will depend on the nature of the sample, and is not defined herein. The methods, where a geometric progression scale with a ratio of 2 is recommended, are generally done by comparing the odor intensity of the sample to the odor intensities of a series of concentrations of the reference odorant 1-butanol (n-butanol). The two procedures differ in the method by which the diluted 1-butanol vapors are prepared. In Procedure A (dynamic scale method), a dynamic-dilution apparatus is used. This is equipped with a series of sniffing ports from which constant concentrations of 1-butanol emerge at constant volumetric flow rates in air. In Procedure B (static-scale method), a series of Erlenmeyer flasks containing known concentrations of 1-butanol in water is used.1.1 This practice is designed to outline a means for referencing the odor intensities of a material in the suprathreshold region.1.2 The general objective is to reference the odor intensity rather than other odor properties of a sample.1.3 This practice is designed to reference the odor intensity on the ASTM Odor Intensity Referencing Scale of any odorous material. This is done by a comparison of the odor intensity of the sample to the odor intensities of a series of concentrations of a reference odorant, for example, 1-butanol (n-butanol).1.4 The method by which the reference odorant vapors are to be presented for evaluation by the assessors is specified. The manner by which the test sample is presented will depend on the nature of the sample, and is not defined herein.1.5 Test sample presentation should be consistent with good standard practice (1, 2)2 and should be explicitly documented in the test report.1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Annex A1 for specific safety data.1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E544-18
标准名称:
Standard Practice for Referencing Suprathreshold Odor Intensity
英文名称:
Standard Practice for Referencing Suprathreshold Odor Intensity标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 1085.18-2003 (R2013) Railway track material Screw spikes and threaded inserts
- AS 1418.18-2001/Amdt 1-2003 Cranes, hoists and winches Crane runways and monorails
- AS 1807.18-1989 Cleanrooms, workstations and safety cabinets - Methods of test Determination of vibration in workstations and safety cabinets
- AS 1807.18-2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of vibration in workstations, safety cabinets and pharmaceutical isolators
- AS 2341.18-1992 Methods of testing bituminous and related roadmaking products Determination of softening point (ring and ball method)
- AS 2362.18-1993 Automatic fire detection and alarm systems - Methods of test for actuating devices Air velocity stability test
- AS 3750.18-2002 (R2013) Paints for steel structures Moisture cure urethane (single-pack) systems
- ASTM D7208-23 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
- ASTM D7210-21 Standard Practice for Extraction of Additives in Polyolefin Plastics
- ASTM D7212-13(2018) Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
- ASTM D7215-22 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
- ASTM D7216-23 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
- ASTM D7219-19 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
- ASTM D7220-22 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
- ASTM D7223-21 Standard Specification for Aviation Certification Turbine Fuel