
【国外标准】 Standard Test Methods for Silanes Used in Rubber Formulations(bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
3.1 The sulfur content can be used to characterize a silane or an admixture of silane and carbon black. It depends mainly on the average length of the sulfur chain.1.1 These test methods cover the determination of the sulfur content of silanes, or of admixtures of silane and carbon black, of the type bis-(triethoxysilylpropyl)sulfane. The following test methods are included:Test Method A: Combustion in an Oxygen Flask and Subsequent Titration of SulfateTest Method B: High-Temperature Combustion with Infrared Absorption Detection1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D6741-10(2023)
标准名称:
Standard Test Methods for Silanes Used in Rubber Formulations(bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
英文名称:
Standard Test Methods for Silanes Used in Rubber Formulations(bis-(triethoxysilylpropyl)sulfanes): Sulfur Content标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS/NZS 1580.481.1.10:1998 (R2013) Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling
- AS/NZS 2023:1995 Baths for ablutionary purposes
- AS/NZS 2098.10:1995 Methods of test for veneer and plywood Measurement of dimensions and shape for structural Laminated Veneer Lumber
- AS/NZS 3350.2.10:1996/Amdt 2:2001 Safety of household and similar electrical appliances Particular requirements - Floor treatment machines and wet scrubbing machines
- AS/NZS 3350.2.10:1996/Amdt 3:2007 Safety of household and similar electrical appliances Particular requirements - Floor treatment machines and wet scrubbing machines (IEC 60335-2-10:1992, MOD)
- AS/NZS 3580.9.10:2006 Methods for sampling and analysis of ambient air Determination of suspended particulate matter - PM2.5 low volume sampler - Gravimetric method
- AS/NZS 4266.10:1995 Reconstituted wood-based panels - Methods of test Determination of glue bond durability (boil test)
- AS/NZS 4266.10:1995/Amdt 1:1997 Reconstituted wood-based panels - Methods of test - Determination of glue bond durability (boil test)
- AS/NZS 4695.10.2:1997 Fire hazard testing of electrotechnical products Guidance and test methods for the minimization of the effects of abnormal heat on electrotechnical products involved in fires - Method for testing products made from non-metallic materials for resistance to heat using the ball pressure test
- AS/NZS 4695.2.10:1996 Fire hazard testing of electrotechnical products Test methods - Glow-wire test methods - General
- AS/NZS 60079.10.1:2009/Amdt 1:2013 Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD)
- AS/NZS 60695.10.2:2002 Fire hazard testing Guidance and test methods for the minimization of the effects of abnormal heat on electrotechnical products involved in fires - Method for testing products made from non-metallic materials for resistance to heat using the ball pressure test (IEC 60695-10-2:1995, IDT)
- AS/NZS 61241.10:2005/Amdt 1:2007 Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present
- AS/NZS ISO 7176.10:2011 Wheelchairs Determination of obstacle-climbing ability of electrically powered wheelchairs
- ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System