
【国外标准】 Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This practice identifies the method of presenting information on selected performance and physical characteristics of a vacuum cleaner. Information will be presented to consumers in the form of a buyer's guide, with cleaner characteristics as follows: brand, model number, weight of cleaner, bag capacity, maximum cleaning distance from outlet, cleaning ability, embedded dirt, maneuverability, maximum air power, quietness, and durability.1.1 This practice identifies the method of presenting information on selected performance and physical characteristics of a residential vacuum cleaner.1.2 This information is intended to assist the consumer in comparing selected characteristics of vacuum cleaner models.1.3 It is also intended that this information be presented in a manner that is meaningful and understandable to the consumer.1.4 The characteristics are selected from those for which ASTM test methods have been developed.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F1411-11(2018)
标准名称:
Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use
英文名称:
Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 2888.11-1993 Methods of testing plastics waste fittings Method for cyclic testing of plastics telescopic waste connectors (rubber-ring joint type)
- AS 2891.11-1991 Methods of sampling and testing asphalt Degree of particle coating
- AS 2891.11-2005 Methods of sampling and testing asphalt Degree of particle coating
- AS 3696.11-1993 Wheelchairs Test dummies
- AS 3894.11-1993 Site testing of protective coatings Equipment report
- AS 4629-2005 (R2018)/Amdt 1-2007 Automatic shut off valves and vent valves
- AS 5013.11.1-2004 Food microbiology - Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - General rules for the preparation of the initial suspension and decimal dilutions
- AS 5013.11.2-2006 Food microbiology Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Specific rules for the preparation of meat and meat products
- AS 5013.11.3-2006 Food microbiology Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Specific rules for the preparation of fish and fishery products
- AS 5013.11.3-2012 Food microbiology Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Specific rules for the preparation of fish and fishery products (ISO 6887-3:2003, MOD)
- AS 60034.11-2009 Rotating electrical machines Thermal protection
- AS 7240.11-2008 Fire detection and alarm systems Manual call points (ISO 7240-11:2005, MOD)
- AS IEC 60300.3.11-2011 Dependability management Application guide - Reliability centred maintenance
- AS ISO 14520.11-2009 Gaseous fire-extinguishing systems - Physical properties and system design HFC 236fa extinguishant (ISO 14520-11:2005, MOD)
- AS/NZS 1635.11.1:1995 Methods of test for pressure-sensitive adhesive tape - Water vapour transmission rate