
【国外标准】 Standard Specification for Adhesive, Casein-Type
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This specification covers casein and other protein-based adhesives in the form of dry powder or granular product for use in adhering wood to wood. This specification provides testing procedures and specifies requirements to differentiate the physical, adhesive, and durability properties of commercially available casein and casein-protein adhesives. Adhesives are classified as class B (water resistant) and class C (dry use). Testing procedures include working life, block shear strength, plywood shear test, and storage life. The adhesive shall conform to the viscosity requirement, working life, block shear, tension, and storage life of this specification. Other requirements include instruction sheet, packing, and marking requirements.1.1 This specification covers casein and other protein-blend adhesives for use adhering wood to wood. The adhesive type covered by this specification is a dry powder or granular product comprising a mixture of casein, or casein and other protein source, with the necessary dry chemicals to effect solution when the mixture is added to water.NOTE 1: Although the term casein adhesive is used throughout this specification, historically, the adhesive subclass described in 1.1 has been known as casein glue. See Terminology D907, adhesive types.1.2 Limitations—Cooked casein adhesives are not covered by this specification.1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.4 The following safety hazards caveat pertains only to the test method portion, Sections 8 through 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D4689-12(2018)
标准名称:
Standard Specification for Adhesive, Casein-Type
英文名称:
Standard Specification for Adhesive, Casein-Type标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS K152.12-1965 Methods for the analysis and testing oc coal and coke Caking and swelling properties of coal
- AS/NZS 1580.481.1.12:1998 (R2013) Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of colour change
- AS/NZS 1766.2.12:2002 Food microbiology Examination for specific organisms - Escherichia coli in bivalve molluscs - Rapid method
- AS/NZS 3350.2.12:1997/Amdt 2:2001 Safety of household and similar electrical appliances Particular requirements - Warming plates and similar appliances
- AS/NZS 3350.2.12:1997/Amdt 3:2007 Safety of household and similar electrical appliances Particular requirements for warming plates and similar appliances (IEC 60335-2-12:1992)
- AS/NZS 3750.12:1996 (R2013) Paints for steel structures Alkyd/micaceous iron oxide
- AS/NZS 4524.12:1998 Bonded abrasive products - Dimensions Grinding wheels for deburring and fettling on a straight grinder
- AS/NZS 4695.2.12:1996 Fire hazard testing of electrotechnical products Test methods - Glow-wire flammability test on materials
- AS/NZS 60079.12:2000 Electrical apparatus for explosive gas atmospheres Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
- AS/NZS 60695.2.12:2001 Fire hazard testing Glowing/hot wire based test methods - Glow-wire flammability test method for materials
- AS/NZS 60745.2.12:2003 Hand-held motor-operated electric tools - Safety - Particular requirements for concrete vibrators
- AS/NZS CISPR 12:2009 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers
- ASC X9 TR 48-2018 Card-Not-Present (CNP) Fraud Mitigation in the United States: Strategies for Preventing, Detecting, and Responding to a Growing Threat
- ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System
- ASTM 52303-24 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities