
【国外标准】 Standard Specification for Steel Wire, Music Spring Quality
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This specification covers high quality, round, cold-drawn steel music spring quality wire for the manufacture of springs subject to high stresses or requiring good fatigue properties. The steel shall either be ingot cast or strand cast. Heat and product analysis shall be performed wherein steel materials shall conform to required chemical compositions of carbon, manganese, phosphorus, sulfur, and silicon. Steel specimens shall also undergo tension test, wrap test, and torsion tests. Final products shall be marked by a tag.1.1 This specification covers two types of round, cold-drawn steel music spring quality wire, uniform in mechanical properties, intended especially for the manufacture of springs subject to high stresses or requiring good fatigue properties.1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM A228/A228M-18
标准名称:
Standard Specification for Steel Wire, Music Spring Quality
英文名称:
Standard Specification for Steel Wire, Music Spring Quality标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 1085.18-2003 (R2013) Railway track material Screw spikes and threaded inserts
- AS 1301.P201m-1986 Methods of test for pulp and paper (metric units) Kappa number of pulp
- AS 1301.P414m-1986 Methods of test for pulp and paper (metric units) Conditioning of paper for testing
- AS 1418.18-2001/Amdt 1-2003 Cranes, hoists and winches Crane runways and monorails
- AS 1807.18-1989 Cleanrooms, workstations and safety cabinets - Methods of test Determination of vibration in workstations and safety cabinets
- AS 1807.18-2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of vibration in workstations, safety cabinets and pharmaceutical isolators
- AS 2341.18-1992 Methods of testing bituminous and related roadmaking products Determination of softening point (ring and ball method)
- AS 2362.18-1993 Automatic fire detection and alarm systems - Methods of test for actuating devices Air velocity stability test
- ASTM D4188-17 Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test in Water
- ASTM D4193-08(2020)e1 Standard Test Method for Thiocyanate in Water
- ASTM D4194-23 Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices
- ASTM D4198-20 Standard Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth
- ASTM D4200-82(2019) Standard Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters
- ASTM D4203-17 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
- ASTM D4206-96(2018) Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus