
【国外标准】 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 This test method provides reasonably accurate information with regard to the ability of UV curing adhesives to withstand torsional shearing forces. It may be used to determine the effect of environment on torsional shear strength.1.1 This test method covers the simplistic comparison of strengths of glass/metal joints when the adhesive is cured by ultraviolet (UV) radiation and standard specimens are used and tested under specified conditions of preparation, radiation, and load.1.2 This test method involves torque loading UV-bonded hexagonal metal blocks to glass plates.1.3 This test method may be used to obtain comparative torque strength-to-failure data for other bonded joint systems, radiation cured or not.1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM D3658-01(2016)
标准名称:
Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
英文名称:
Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 4267-1995 (R2016)/Amdt 1-1995 Pressure regulators for use with industrial compressed gas cylinders
- AS 4428.5-1998 (R2016)/Amdt 1-2002 Fire detection, warning, control and intercom systems - Control and indicating equipment Power supply units
- AS 4429-1999 (R2016)/Amdt 1-2002 Methods of test and rating requirements for smoke-spill fans
- AS 4458-1997 (R2016)/Amdt No. 1-1999 Pressure equipment - Manufacture
- AS 5040-2003 (R2016)/Amdt 1-2007 Installation of security screen doors and window grilles
- AS 5041-2003 (R2016)/Amdt 1-2007 Methods of test - Security screen doors and window grilles
- AS 5068-2006 (R2016)/Amdt 1-2010 Timber - Finger joints in structural products - Production requirements
- AS 60044.1-2007 (R2016)/Amdt 1-2012 Instrument transformers Current transformers
- AS ISO/IEC 17025-2005 (R2016)/Amdt 1-2006 General requirements for the competence of testing and calibration laboratories
- AS/NZS 1170.1:2002 (R2016)/Amdt 1:2005 Structural design actions Permanent, imposed and other actions
- AS/NZS 1170.1:2002 (R2016)/Amdt 2:2009 Structural design actions Permanent, imposed and other actions
- AS/NZS 1595:1998 (R2016)/Amdt 1:2014 Cold-rolled, unalloyed, steel sheet and strip
- AS/NZS 2111.19.2:1996 (R2016)/Amdt 1:1998 Textile floor coverings - Tests and measurements - Colourfastness tests - Shampoo solution
- AS/NZS 2270:2006 (R2016)/Amdt 1:2007 Plywood and blockboard for interior use
- AS/NZS 2271:2004 (R2016)/Amdt 1:2006 Plywood and blockboard for exterior use