
【国外标准】 Standard Test Method for Impact Strength of Adhesive Bonds
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 Adhesives can fail under a sudden impact load and not under a slowly applied load of the same or greater force.4.2 This test method can be used to compare the sensitivity of various adhesives to suddenly applied loads.1.1 This test method covers the determination of the comparative impact strength of adhesive bonds in shear, when tested on standard specimens under specified conditions of preparation, conditioning, and testing.1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D950-03(2020)e1
标准名称:
Standard Test Method for Impact Strength of Adhesive Bonds
英文名称:
Standard Test Method for Impact Strength of Adhesive Bonds标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D3964-10(2020) Standard Practice for Selection of Coating Specimens for Appearance Measurements
- ASTM D3965-21 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
- ASTM D3966/D3966M-22 Standard Test Methods for Deep Foundation Elements Under Static Lateral Load
- ASTM D3967-23 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens with Flat Loading Platens
- ASTM D3972-09(2015) Standard Test Method for Isotopic Uranium in Water by Radiochemistry
- ASTM D3974-09(2023) Standard Practices for Extraction of Trace Elements from Sediments
- ASTM D3975-93(2019) Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
- ASTM D3976-22 Standard Practice for Preparation of Sediment Samples for Chemical Analysis
- ASTM D3977-97(2019) Standard Test Methods for Determining Sediment Concentration in Water Samples
- ASTM D3978-21a Standard Practice for Algal Growth Potential Testing with Pseudokirchneriella subcapitata
- ASTM D3981-09a(2016) Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
- ASTM D3982-21 Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts
- ASTM D3983-98(2019) Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
- ASTM D3984-19 Standard Specification for Ethane Thermophysical Property Tables
- ASTM D3985-17 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor