
【国外标准】 Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 This practice provides a standard procedure for reporting data and results of structural tests used for building constructions, elements, corrections, and assemblies. It enumerates and discusses the report sections required to report data from test methods and practices. The written reports will describe the products tested, method of testing, and results.1.1 This practice covers general use in reporting structural performance tests of building constructions, elements, connections, and assemblies. A comprehensive report describing the conditions under which the structural data were recorded will enable other workers to reproduce the test methods and, as nearly as possible, the results for each material or assembly, and to reconcile differences that might be found in tests by others.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E575-05(2018)
标准名称:
Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
英文名称:
Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ANSI X9.100-140-2018 Financial Services - Image Replacement Document - IRD
- ANSI X9.100-180-2006 (S2018) Specifications for Electronic Exchange of Check and Image Data (non-domestic) (Formerly published as DSTU X9.37-2003)
- ANSI X9.100-188-2018 Financial Services - Return Reasons for Check - Image Exchange and IRDs
- ANSI X9.112-3-2018 Wireless Management and Security - Part 3: Mobile
- ANSI X9.84-2018 Biometric Information Management and Security for the Financial Services Industry
- ANSI/OPEI B175.6-2018 Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Hedge Trimmers - Safety and Environmental Requirements
- AS 1366.1-1992 (R2018)/Amdt 1-1992 Rigid cellular plastics sheets for thermal insulation - Rigid cellular polyurethane (RC/PUR)
- AS 1366.3-1992 (R2018)/Amdt 1-1993 Rigid cellular plastics sheets for thermal insulation - Rigid cellular polystyrene - Moulded (RC/PS - M)
- AS 4629-2005 (R2018)/Amdt 1-2007 Automatic shut off valves and vent valves
- ASC X9 TR 48-2018 Card-Not-Present (CNP) Fraud Mitigation in the United States: Strategies for Preventing, Detecting, and Responding to a Growing Threat
- ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System
- ASTM 52303-24 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
- ASTM A1-00(2018) Standard Specification for Carbon Steel Tee Rails
- ASTM A1000/A1000M-17(2023) Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
- ASTM A1001-18 Standard Specification for High-Strength Steel Castings in Heavy Sections