
【国外标准】 Standard Test Method for Determination of the Blooming of Brominated Flame Retardants onto the Surface of Plastic Materials by Ion Chromatography
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 This test method will allow the quantitative determination of the bromine originating from the flame retardant that has bloomed onto the surface after aging under specified conditions. Based on the known structure of the flame retardant used, the amount of the flame retardant that bloomed can also be calculated.5.2 Section 14 contains some safety recommendations.1.1 This test method covers the quantification of the blooming of brominated flame retardants onto the surface of plastic materials by an ion chromatographic method.1.2 The test method involves recovery of the deposits on the surface of plastic materials, containing brominated flame retardants, on unaged specimens, on specimens aged at 70°C for 14 days and on specimens aged at 70°C for 35 days. These deposits are quantitatively analyzed to obtain the fraction of brominated flame retardant that has bloomed onto the surface.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.NOTE 1: There is no known ISO equivalent to this standard.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D8280-20a
标准名称:
Standard Test Method for Determination of the Blooming of Brominated Flame Retardants onto the Surface of Plastic Materials by Ion Chromatography
英文名称:
Standard Test Method for Determination of the Blooming of Brominated Flame Retardants onto the Surface of Plastic Materials by Ion Chromatography标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ANSI X9.100-20-2021 Magnetic Ink Character Recognition - Printing MICR Characters
- ASTM D4114-21 Standard Performance Specification for Woven Flat Lining Fabrics for Women's and Girls' Apparel
- ASTM D4115-20 Standard Performance Specification for Women's and Girls' Knitted and Woven Dress Glove Fabrics
- ASTM D4116-20 Standard Performance Specification for Women's and Girls' Knitted and Woven Corset-Girdle-Combination Fabrics
- ASTM D412-16(2021) Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
- ASTM D4127-18a Standard Terminology Used with Ion-Selective Electrodes
- ASTM D4129-05(2020) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
- ASTM D4131-19 Standard Practice for Sampling Fish with Rotenone
- ASTM D4138-07a(2022) Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
- ASTM D4139-04(2020) Standard Guide for Determining Volatile and Nonvolatile Content of Pigments
- ASTM D4140-07(2018) Standard Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and Solvents
- ASTM D4141/D4141M-22 Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
- ASTM D4142-89(2022) Standard Guide for Testing Epoxy Resins
- ASTM D4155-22 Standard Performance Specification for Women's and Girls' Woven Sportswear, Shorts, Slacks, and Suiting Fabrics
- ASTM D4157-13(2022) Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)