
【国外标准】 Standard Test Method for Impact Testing for Shipping Containers and Systems
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 The impact test has been found useful in laboratory simulation of impacts such as those encountered in manual and mechanical handling and transportation. The impact test simulates some types of shocks that could occur in the handling of packages or shipping units and helps evaluate the ability of the package to protect the contents against these shocks. The test may also permit observation of progressive failure of a package and damage to the contents.5.2 The test results within a given laboratory using this test method may be useful for evaluating and comparing packages. However, because of the variability of test machines that have been used in the past, especially the impact surface (backstop), it has been found that interlaboratory correlation of test results has been poor.5.3 These procedures are not intended to simulate rail car coupling environment. Refer to Test Method D4003 and Test Methods D5277.5.4 This test method fulfills the requirement of ISO 2244.NOTE 1: ISO 2244 may not meet the requirements for this test method.1.1 This test method covers two procedures for conducting impact tests on loaded containers or shipping units (pallet loads), as follows:1.1.1 Procedure A, to test the ability of a container or shipping unit to withstand impacts, and1.1.2 Procedure B, to test the ability of a container or shipping unit or interior packing, or both, to provide protection to the contents, when subjected to impacts.1.2 Either of these two procedures may be used to evaluate different designs of containers of the same size and carrying the same load. These procedures are suitable for testing various types of containers such as boxes, crates, barrels, drums, kegs, bags, sacks, or pails made of various materials or combinations of materials and for shipping units such as pallet loads or palletized units.1.3 The procedures described in this test method are particularly suitable for testing large or heavily loaded containers.1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Note 1 and Section 7.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D880-92(2021)
标准名称:
Standard Test Method for Impact Testing for Shipping Containers and Systems
英文名称:
Standard Test Method for Impact Testing for Shipping Containers and Systems标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM B615-79(2022) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
- ASTM B616-23 Standard Specification for Refined Rhodium
- ASTM B617-98(2021) Standard Specification for Coin Silver Electrical Contact Alloy
- ASTM B618/B618M-18e1 Standard Specification for Aluminum-Alloy Investment Castings
- ASTM B619/B619M-19(2023) Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
- ASTM B62-17 Standard Specification for Composition Bronze or Ounce Metal Castings
- ASTM B621-21 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy Rod
- ASTM B622-23 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
- ASTM B628-98(2021) Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
- ASTM B63-07(2018) Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
- ASTM B631-93(2021) Standard Specification for Silver-Tungsten Electrical Contact Materials
- ASTM B633-23 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
- ASTM B634-14a(2021) Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
- ASTM B636/B636M-15(2021) Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
- ASTM B639-02(2018) Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service