
【国外标准】 Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 This specification2 covers asphalt binders graded by performance. Grading designations are related to the LTPPBind Online calculated maximum pavement design temperature, the minimum pavement design temperature, and the traffic loading.NOTE 1: For more information on LTPPBind Online, see https://infopave.fhwa.dot.gov/Tools/LTPPBindOnline accessed May 23, 2023.1.2 This specification incorporates Test Method D7405 for determining non-recoverable creep compliance, Jnr. “S,” “H,” “V,” or “E” designations must be specified for standard, heavy, very heavy, and extremely heavy traffic loading, respectively.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.NOTE 2: A guidance document for specifying bodies using R % for elastic properties is under development.NOTE 3: For asphalt binders graded by penetration at 25 °C, see Specification D946/D946M. For asphalt binders graded by viscosity at 60 °C, see Specification D3381/D3381M. For performance-graded asphalt binder, see Specification D6373.NOTE 4: AASHTO R 29 provides non-mandatory information for determining the performance grade of an asphalt binder.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D8239-23
标准名称:
Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test
英文名称:
Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM A876-17e1 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
- ASTM A877/A877M-17(2023) Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
- ASTM A878/A878M-19 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
- ASTM A882/A882M-20 Standard Specification for Filled Epoxy-Coated Seven-Wire Steel Prestressing Strand
- ASTM A886/A886M-17 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
- ASTM A887-20 Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
- ASTM A888-23 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
- ASTM A890/A890M-18a Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
- ASTM A893/A893M-03(2022) Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
- ASTM A899-91(2021) Standard Specification for Steel Wire, Epoxy-Coated
- ASTM A901-19 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
- ASTM A902-23a Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A903/A903M-99(2017) Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
- ASTM A904-20 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts
- ASTM A906/A906M-02(2022) Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting