
【国外标准】 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 Eddy-current probes may be used for the nondestructive examination of parts or structures made of electrically conducting materials. Many of these examinations are intended to discover material defects, such as cracks, that may cause the part or structure to be unsafe or unfit for service. Eddy-current probes that fail to meet the performance level requirements of this practice shall not be used for the examination of material or hardware unless the probe is qualified by some other system or an agreement has been reached by the probe manufacturer and the purchaser, or both.1.1 This practice covers a procedure for determining the impedance of absolute eddy-current probes (bridge-type, air or ferrite core, wire wound, shielded, or unshielded) used for finding material defects in electrically conducting material. This practice is intended to establish a uniform methodology to measure the impedance of eddy-current probes prior to receipt of these probes by the purchaser or the specifier.1.2 Limitations—This practice does not address the characterization or measurement of the impedance of differential, a-c coupled, or transmit/receive types of probes. This practice does not address the use of magnetic materials in examination probes. This practice shall not be used as a basis for selection of the best probe for a particular application or as a means by which to calibrate or standardize a probe for a specific examination. This practice does not address differences in the impedance values that can be obtained when the probe and material are in relative motion, as in a rotating probe, since the procedure described here requires the probe and material to be stationary.1.3 Units—The values stated in SI units are to be regarded as the standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E1629-12(2020)
标准名称:
Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
英文名称:
Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 3894.12-1993 Site testing of protective coatings Inspection report - Coating
- AS CA12-1970 Work in compressed air (known as the SAA Compressed Air Code)
- AS IEC 60300.3.12-2011 Dependability management Application guide - Integrated logistic support
- AS ISO 10993.12-2002 Biological evaluation of medical devices Sample preparation and reference materials
- AS K152.12-1965 Methods for the analysis and testing oc coal and coke Caking and swelling properties of coal
- AS/NZS 1580.481.1.12:1998 (R2013) Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of colour change
- AS/NZS 1766.2.12:2002 Food microbiology Examination for specific organisms - Escherichia coli in bivalve molluscs - Rapid method
- AS/NZS 3350.2.12:1997/Amdt 2:2001 Safety of household and similar electrical appliances Particular requirements - Warming plates and similar appliances
- AS/NZS 3350.2.12:1997/Amdt 3:2007 Safety of household and similar electrical appliances Particular requirements for warming plates and similar appliances (IEC 60335-2-12:1992)
- AS/NZS 3750.12:1996 (R2013) Paints for steel structures Alkyd/micaceous iron oxide
- ASTM D1050-05(2022) Standard Specification for Rubber Insulating Line Hose
- ASTM D1053-92a(2018) Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics
- ASTM D1056-20 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
- ASTM D1059-17(2022) Standard Test Method for Yarn Number Based on Short-Length Specimens
- ASTM D1062-08(2023) Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds