
【国外标准】 Standard Guide for Conducting Borehole Geophysical Logging—Neutron
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 An appropriately developed, documented, and executed guide is essential for the proper collection and application of neutron logs. 5.2 The benefits of its use include improving selection of neutron logging methods and equipment; neutron log quality and reliability; usefulness of the neutron log data for subsequent display and interpretation. 5.3 This guide applies to commonly used neutron logging methods for geotechnical applications. 1.1 This guide is focused on the general procedures necessary to conduct neutron or neutron porosity (hereafter referred to as neutron) logging of boreholes, wells, access tubes, caissons, or shafts (hereafter referred to as boreholes) as commonly applied to geologic, engineering, groundwater and environmental (hereafter referred to as geotechnical) explorations. Neutron soil moisture measurements made using neutron moisture gauges, are excluded. Neutron logging for minerals or petroleum applications is excluded, along with neutron activation logs where gamma spectral detectors are used to characterize the induced gamma activity of minerals exposed to neutron radiation. 1.2 This guide defines a neutron log as a record of the rate at which thermal and epithermal neutrons are scattered back to one or more detectors located on a probe adjacent to a neutron source. 1.2.1 Induction logs are treated quantitatively and should be interpreted with other logs and data whenever possible. 1.2.2 Neutron logs are commonly used to: (1) delineate lithology, and (2) indicate the water-filled porosity of formations (see Fig. 1). Nc = corrected neutron log, N0 = original neutron log, Csh = computed shale fraction based upon the gamma log position between the endpoints of 10 and 120 cps, and Φsh = estimate of shale non-effective porosity of about 40 % picked from intervals on the log where Φsh = 1.0.
标准号:
ASTM D6727/D6727M-16
标准名称:
Standard Guide for Conducting Borehole Geophysical Logging—Neutron
英文名称:
Standard Guide for Conducting Borehole Geophysical Logging—Neutron标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM A646/A646M-17(2022) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
- ASTM A648-18 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
- ASTM A649/A649M-10(2020) Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
- ASTM A650/A650M-18 Standard Specification for Tin Mill Products, Black Plate, Double Reduced
- ASTM A660/A660M-21 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
- ASTM A662/A662M-17 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
- ASTM A663/A663M-23 Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
- ASTM A666-23 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
- ASTM A668/A668M-23 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
- ASTM A673/A673M-17 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
- ASTM A677-16(2023) Standard Specification for Nonoriented Electrical Steel Fully Processed Types
- ASTM A681-08(2022) Standard Specification for Tool Steels Alloy
- ASTM A683-16(2023) Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
- ASTM A693-22 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- ASTM A694/A694M-16(2022) Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service