![](/images/icon_detail_title.png)
【国外标准】 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
![标准简介](/images/icon_detail_info.png)
适用范围:
This specification covers killed carbon- manganese-silicon steel plates intended for welded pressure vessels in service at moderate and lower temperatures. As a steel making practice, the steel shall be killed and shall conform to specified fine austenitic grain size requirements. Plates are normally supplied in the as-rolled condition. Plates may be ordered normalized or stress relieved, or both. The steel shall conform to the required chemical compositions. The plates, as represented by the tension test specimens, shall conform to the mechanical property requirements.1.1 This specification2 covers killed carbon-manganese-silicon steel plates intended for welded pressure vessels in service at moderate and lower temperatures.1.2 The maximum thickness of plates is limited only by the capacity of the material to meet the specified mechanical property requirements.1.3 For plates produced from coil and furnished without heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting of additional test results, of Specification A20/A20M apply.1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM A612/A612M-20
标准名称:
Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
英文名称:
Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- 24/30477165 DC BS EN ISO 2400 Non-destructive testing - Ultrasonic testing - Specification for standard block
- 24/30457662 DC BS ISO/IEC 8801 Information Technology - 3D Printing and Scanning - Data Standard Operating
- BS EN ISO 16946:2024 - TC standard block
- BS EN ISO 16946:2024 Non-destructive testing. Ultrasonic testing. Specification for a step wedge standard block
- BS EN IEC 61753-082-02:2024 Fibre optic interconnecting devices and passive components. Performance standard
- BS ISO 5501-2:2024 Tobacco heating systems. Definitions and standard conditions for aerosol generation and collection
- BS ISO 5501-3:2024 Tobacco heating systems. Definitions and standard conditions for aerosol generation and collection
- BS ISO 5501-1:2024 Tobacco heating systems. Definitions and standard conditions for aerosol generation and collection
- KS C IEC 61340-4-9 정전기학 — 제4-9부: 구체적 적용 분야에 대한 표준 시험방법 — 의류
- BS ISO 24138:2024 Information and documentation. International Standard Content Code (ISCC)
- KS C IEC TS 61340-4-2 정전기학 — 제4-2부: 구체적 적용 분야에 대한 표준 시험방법 — 의류의 정전기적 특성
- KS L 5122 시멘트·콘크리트용 시멘트계 대체 혼화재료의 평가를 위한 표준 지침
- 24/30492859 DC BS EN IEC 61753-1 Fibre optic interconnecting devices and passive components - Performance standard
- BS EN IEC 61753-071-02:2020+A1:2024 Fibre optic interconnecting devices and passive components. Performance standard
- 24/30491443 DC standard