4.1 This guide establishes the minimum training criteria for Mountain Bike Search and Rescue Endorsed personnel.4.2 At no time will this standard supersede any established protocols of international, national, federal, state, tribal, local, or regional governments.4.3 Every person who is identified as a Mountain Bike Search and Rescue Endorsed individual shall have met the requirements of this guide.4.4 Though this guide establishes only minimum standards, it does not imply that a Mountain Bike Search and Rescue Endorsed individual is a “trainee,” “probationary,” or other similarly termed member of an agency or organization.4.4.1 The AHJ is responsible for determining the requirements and qualifications for its team member ratings.4.4.2 Nothing in this guide precludes an AHJ from adding additional requirements for its own members.4.5 A person meeting the requirements of this guide does not necessarily possess adequate field skills and knowledge to make mission-critical decisions.4.6 This guide by itself is not a training document. It is an outline of the topics required for training or evaluating Mountain Bike Search and Rescue Endorsed personnel.4.7 This guide is an outline of the topics required for training or evaluating Mountain Bike Search and Rescue Endorsed personnel and may be used to assist in the development of a training document or program.4.8 This guide can be used to evaluate a document to determine if its content includes the topics necessary for training an individual to be Mountain Bike Search and Rescue Endorsed personnel. Likewise, this guide may be used to evaluate an existing training program to see if it meets the requirements in this guide.4.9 The knowledge, skills, and abilities presented in the following sections are not in any particular order and do not represent a training sequence.4.10 This guide does not stand alone and must be used with other ASTM Standards to identify the knowledge, skills, and abilities needed for a Mountain Bike Search and Rescue Endorsed individual to perform safely and effectively.4.11 Mountain Bike Search and Rescue Endorsed personnel shall document training by completion of a position task book, compliant with ASTM F3068, or by field demonstration under qualified supervision.4.11.1 Where proficiency in a skill or ability must be demonstrated, unless stated otherwise it shall be demonstrated for initial qualification, and as often as required by the AHJ.4.11.2 Proficiency shall be demonstrated to a qualified observer as defined by the AHJ.1.1 This guide establishes the minimum training and equipment requirements, including general and field knowledge, skills, and abilities, for search and rescue personnel who operate on mountain bikes.1.2 Mountain Bike Search and Rescue Endorsed individuals may, under qualified supervision, perform their normal duties safely and effectively on mountain bikes.1.3 A Mountain Bike Search and Rescue Endorsement alone is not sufficient to indicate that an individual has the knowledge, skills, or abilities to perform any specific duties, including search and rescue operations, other than those defined within this guide.1.4 Personnel trained to only this guide are not qualified to operate in leadership positions.1.5 Mountain Bike Search and Rescue Endorsed individuals operate on the surface of the land only, including urban or disaster areas that may be isolated or have lost supporting infrastructure.1.6 Human land SAR resources that may utilize personnel trained to this guide are classified in Classification F1993.1.6.1 Further training may be required before Mountain Bike Search and Rescue Endorsed personnel may participate on a particular Category or Kind of SAR resource, depending on local needs, regulations, or policies of the authority having jurisdiction.1.7 This guide alone does not provide the minimum training requirements for SAR personnel to operate on mountain bikes while performing operations in partially or fully collapsed structures, in- or on-water, in confined spaces, underground (such as in caves, mines, and tunnels), or in mountain or alpine environments.1.8 Personnel trained to this guide are not qualified to perform rescue. No training in rope use, high or low angle litter evacuation, or other rescue skills is included in this guide.1.8.1 Basic rescue skills and knowledge are found in Guide F2751.1.9 Mountain Bike Search and Rescue Endorsed personnel must work under qualified supervision, as deemed appropriate by the AHJ.1.10 This standard is created without regard to the type of mountain bike, gear, panniers, first aid supplies, or personal protective equipment that is used by a Mountain Bike Search and Rescue Endorsed individual.1.11 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

定价： 515元 / 折扣价： 438 元 加购物车

This specification defines the masses to be used when testing rescue systems and components. The masses represent personnel and equipment that may be attached to a rescue system or components. However, the masses do not represent any particular type or kind of rescuer or equipment. The masses shall be classified as follows: Type I; Type II; Type III; Type IV; and Type V.1.1 This specification defines the masses to be used when testing rescue systems and components.1.2 The masses represent personnel and equipment that may be attached to a rescue system or components. However, the masses do not represent any particular type or kind of rescuer or equipment.1.2.1 The masses chosen have been used in the past or are in current use in testing of rescue systems and components. Limiting testing to the masses listed in this specification allows meaningful comparisons between past, current, and future test results.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 The user of this specification shall determine which mass(es) represent(s) the personnel and equipment attached to the system or component under test.1.5 For the purposes of this specification, mass and weight are synonymous when the object(s) representing the mass(es) are weighed in air anywhere on Earth.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

定价： 0元 / 折扣价： 0 元

3.1 The terminology in this document is applicable to the standards and guides published by ASTM Committee F32.3.2 The definitions provided in this terminology standard shall be used when interpreting the meaning, purpose or applicability of a guide, standard, or a specific subsection therein.1.1 This terminology document is a compilation of definitions of terms, abbreviations, and acronyms used in F32 Land Search and Rescue Standards and Guides, collected in order to provide consistency in communications when used in writing and interpreting the Committee’s documents.

定价： 590元 / 折扣价： 502 元 加购物车

4.1 Classification of human land search and rescue resources is based upon the training of the personnel and their ability to perform specific tasks.4.2 Human search and rescue resources are classified by category, kind, and duration.1.1 This classification is intended to identify the common functional units and single resources used in search and rescue operations; to aid search and rescue (SAR) managers and Authorities Having Jurisdiction (AHJs) in assembling or ordering resources for search, rescue, or search and rescue incidents; and to aid in identifying the tasks for which crews have been trained.1.2 This classification is intended as a supplement to the resource typing specifications of the Incident Command System and specifically as a means of typing human resources used in land search and rescue activities.1.3 This classification is suitable for classifying search and rescue crews for land search and rescue incidents.1.4 This classification does not attempt to classify individuals or put forth standards of performance or training for individuals, nor is it meant to convey certification, skill proficiency, or other measures of the level of performance of the resource. These qualifications are the responsibility of the local agencies responsible for utilizing the resource.1.5 This classification identifies human-based resources. Canine crew (or team) classifications are defined in Classification F1848.1.6 This classification does not classify air resources (Guides F2958 and F3026) or water resources (Guides F1739, F1783, and F1824).1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 515元 / 折扣价： 438 元 加购物车

4.1 This guide establishes the minimum knowledge, skills, and abilities that a person must have to perform as a Land Search and Rescue Team Leader. No other skills are included or implied.4.2 Every person who is identified as a Land Search and Rescue Team Leader shall have met the requirements of this guide.4.3 This guide is to be used by individuals, organizations, and agencies having jurisdiction that wish to identify the minimum training required for a Land Search and Rescue Team Leader.4.3.1 Though this guide establishes the minimum training required for a Land Search and Rescue Team Leader, it does not imply that a Land Search and Rescue Team Leader is a “trainee,” “probationary,” or other similar term member of an AHJ.4.3.2 Determining the requirements and qualifications for team members is the responsibility of the AHJ.4.3.3 The AHJ shall determine the depth or detail of training required to meet these needs.4.3.4 Nothing in this standard precludes an AHJ from requiring additional knowledge, skills, or abilities for its members.4.4 This guide can be used to evaluate a document or training program to determine if its content includes the topics necessary for training individuals to operate as a Land Search and Rescue Team Leader.4.5 This guide by itself is not a training document. It is an outline of the topics required for training or evaluating a Land Search and Rescue Team Leader.4.6 This guide does not stand alone and must be used with the referenced documents to provide specific information needed by a Land Search and Rescue Team Leader or AHJ.4.7 This guide can be used to evaluate a book or other document to determine if its content meets the necessary topics for training an Land Search and Rescue Team Leader. Likewise, this guide can be used to evaluate an existing training program to see if it meets the requirements in this guide.4.8 The knowledge, skills, and abilities presented in the following sections are not in any particular order and do not represent a training sequence.4.9 A Land Search and Rescue Team Leader shall document his or her training by completion of a position task book, compliant with Guide F3068, or by field demonstration under qualified supervision.4.10 Unless stated otherwise, an ability or proficiency in a skill shall be demonstrated for initial qualification and then as often as required by the AHJ.4.11 Except where a physical skill or ability must be demonstrated the AHJ shall determine the best way to evaluate a person’s knowledge. This may be by written exam, oral exam, demonstration, or by some combination of the three.4.12 Additional skill set-specific endorsements may be used in conjunction with this document to train rescue personnel for other rescue disciplines.1.1 This guide establishes the minimum training requirements, including general and field knowledge, skills, and abilities, for personnel who lead land search and rescue teams.1.2 Land Search and Rescue Team Leaders direct search and rescue teams on the surface of the land only, including urban or disaster areas that may be isolated or have lost supporting infrastructure.1.3 This guide does not provide the minimum training required for conducting rescues in partially or fully collapsed structures, in or on water, in confined spaces, or underground (such as in caves, mines, and tunnels), or in mountainous terrain.1.4 Personnel trained to this guide alone are qualified to conduct or lead search and rescue operations on non-technical terrain.1.5 Personnel trained to this guide alone are not qualified to direct rope rescues. No knots, rope work, or high angle or low angle rescue skills are included in this guide.1.5.1 The minimum training required for rope rescue can be found in Guides F2752, F2954, and F2955.1.5.2 Personnel trained to this standard and having a Rope Rescuer Endorsement (Guides F2752, F2954, F2955) are qualified to supervise rope rescue teams of equal level or lower.1.6 A Land Search and Rescue Team Leader can be utilized as a team leader for land search or rescue teams, a single resource, or a support person for a canine search team.1.7 Land Search and Rescue Team Leaders are eligible to supervise Land Search, Land Rescue, Land Search and Rescue, and Untrained teams or crews as defined in Classification F1993 for non-wilderness and wilderness operations. In addition to meeting the requirements of this guide, Search and Rescue Team Leaders shall have the identified endorsement for the reason identified:1.7.1 Mountainous Terrain—Search and Rescue Team Leaders shall meet the requirements of Guides F3027 or F3028;1.7.2 Alpine Terrain—Search and Rescue Team Leaders shall meet the requirements of Guide F3028;1.7.3 Mountainous Operations—Search and Rescue Team Leaders shall meet the requirements of Guide F3175;1.7.4 ATV-ROHV Operations—Search and Rescue Team Leaders shall meet the requirements of Guide F3175;1.7.5 Rope Rescue Operations—Search and Rescue Team Leaders shall meet the requirements of Guides F2954 or F2955.1.8 Search and Rescue Team Leaders supervising Mounted Teams shall also meet the requirements of Guide F2794.1.9 Further training may be required before a Land Search and Rescue Team Leader can supervise a particular team, depending on local needs, regulations, or policies of the authority having jurisdiction.1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

定价： 590元 / 折扣价： 502 元 加购物车

3.1 The ICS framework is designed to be used for all emergencies and is applicable to small day-to-day situations as well as very large and complex incidents.3.2 The ICS framework, operating requirements, components, and procedures are designed for organizing and operating an on-scene management structure only.3.3 Users of this guide are expected to be familiar with the ICS.3.4 Neither this guide nor any of the Federal Emergency Management Agency (FEMA) approved ICS courses or documents provide a specific plan for managing an SAR operation, but rather they outline a process for developing a management and coordination framework.3.5 It is not intended for this standard to conflict in any way with civil SAR responsibilities agreed to by the National Search and Rescue Plan of the United States, the International Aeronautical and Maritime Search and Rescue Manual (IAMSAR), or other appropriate international instruments.1.1 This guide covers the use of the Incident Command System (ICS), as developed in the National Incident Management System (NIMS) in 2004, as the management framework for search and rescue (SAR) operations.1.2 Except as otherwise specified herein, the methods and requirements of this standard also include NIMS, ICS, and National Response Framework (NRF) requirements, when required, for search and rescue personnel that deploy within the United States of America.1.3 The ICS may be used outside of the United States for managing SAR operations, users of this standard need to be aware of other incident management requirements, guidelines, policies, procedures, and protocols within the area of ICS SAR operations.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 515元 / 折扣价： 438 元 加购物车

1.1 This safety specification establishes requirements for devices intended to address the risk of injury and death associated with accidental falls through open windows by children five years old and younger.NOTE 1: This safety specification is not intended to meet the unique requirements of Americans With Disabilities Act (ADA).1.2 This safety specification applies only to window fall prevention devices, window fall prevention screens, and fall prevention window guards that are to be used on windows that are not intended for escape (egress) and rescue (ingress).NOTE 2: Specification F2090 addresses window fall prevention devices (releasable), including window opening control devices (WOCD(s)) for windows intended for emergency escape and rescue and any other window not covered by this safety specification.1.3 This safety specification applies only to devices intended to be applied to windows installed at heights of more than 75 ft7 (23 m) above ground level in multiple family dwelling buildings. This safety specification is not intended to apply to windows below 75 ft (23 m) because all windows below 75 ft (23 m) that are operable and that meet the requirements for emergency escape and rescue openings could be used as a possible secondary means of escape.8NOTE 3: Users of this safety specification should consult local authorities for other requirements that may apply to the use or installation, or both, of products covered by this safety specification.1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.5 This standard does not purport to address all safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and to determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 590元 / 折扣价： 502 元 加购物车

3.1 This practice establishes a multiple person cold water survival/rescue procedure.3.2 All persons who are identified as water rescuers shall meet the requirements of this practice.3.3 This practice is intended to assist government agencies, state, local, or regional organizations; fire departments; and rescue teams and others who are responsible for establishing a minimum performance for personnel who respond to water emergencies.3.4 The majority of the rescuers performing this technique must be wearing personal flotation devices. These devices should conform to standards set by the appropriate national regulatory authority, that is, the U.S. Coast Guard in the United States, and be in good and serviceable condition.3.5 A water rescuer sometimes may be immersed in cold water for prolonged periods of time. They are unable to get to shore or shore is too far away, rescue is not imminent, no boat is available to get into or on top of, and no flotsam is available. The water rescuer needs to assume a defensive posture to conserve heat and increase survival time.1.1 This practice covers the recommended water rescue procedure for performing the huddle position.1.2 This practice is one in a set of self-rescue techniques for the water rescuer.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 515元 / 折扣价： 438 元 加购物车

3.1 This practice establishes a single person cold water survival/rescue procedure.3.2 All persons who are identified as water rescuers shall meet the requirements of this practice.3.3 This practice is intended to assist government agencies, state, local, or regional organizations; fire departments; and rescue teams and others who are responsible for establishing a minimum performance for personnel who respond to water emergencies.3.4 A rescuer needs to be wearing a personal flotation device to perform this technique. These devices should conform to standards set by the appropriate national regulatory authority, that is, the U.S. Coast Guard in the United States, and be in good and serviceable condition.3.5 A water rescuer sometimes may be immersed in cold water for prolonged periods of time. They are unable to get to shore or shore is too far away, rescue is not imminent, no boat is available to get into or on top of, and no flotsam is available. The water rescuer needs to assume a defensive posture to conserve heat and increase survival time.1.1 This practice covers the recommended water rescue procedure for performing the heat escape lessening posture (HELP) position.1.2 This practice is one in a set of self-rescue techniques for the water rescuer.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 515元 / 折扣价： 438 元 加购物车

3.1 This guide establishes a recommended procedure for a throwing rescue to ensure the safety of all water rescuers who may be involved in rescue techniques at a water rescue emergency.3.2 This water rescue technique can be utilized from land, boat, or any stable platform.3.3 All persons who are identified as water rescuers shall meet the requirements of this guide.3.4 This guide is intended to assist government agencies, state, local, and regional organizations; fire departments; rescue teams and others who are responsible for establishing a minimum performance for personnel who respond to water emergencies.3.5 The procedure outlined in the document may vary with the number and type of victims, and water conditions.1.1 This guide covers the recommended procedures for throwing a water rescue throwbag.1.2 This guide is one in a series of water rescue techniques for the water rescuer.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 515元 / 折扣价： 438 元 加购物车

3.1 This guide may be used to provide a consistent method for determining load ratios for technical rescue equipment and systems.3.2 Use of this guide will help to maintain clearer, more consistent calculation and reporting of load ratios.3.3 It should be acknowledged that, while component load ratios are fairly straightforward to calculate, they are of limited value for estimating system load ratios. System load ratios are usually desired for field applications, but are more difficult to calculate accurately.1.1 This guide covers the general concept of determining safety factors for technical rescue equipment and systems.1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3 In the event of any conflict between the text of this guide and any references cited, the text of this guide takes preference.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 515元 / 折扣价： 438 元 加购物车

4.1 These test methods are intended to provide reproducible data from which acceptance criteria, design data, and specifications can be developed for basket type rescue litters.1.1 These test methods enable the user to determine if a rescue litter meets the requirement for strength depending upon particular applications and methods of use.1.2 The test methods described in this standard are designed to test several parameters under “manner of use” conditions.1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 515元 / 折扣价： 438 元 加购物车

This specification specifies the minimum strength requirements for anchorages permanently installed or attached to training towers or other structures used for rope rescue training. It specifies the design loads that must be considered and does not describe how those anchorages are constructed, installed in, or attached to the structure nor does it include any factors of safety. Each anchorage shall be designed to hold a minimum of 40 kN in all directions of potential loading and shall be manufactured in such a way that a carabiner with a gate opening of 25 mm or greater shall fit around it and the gate shall be able to close and lock. The anchorage shall be constructed using rounded stock or with beveled or chamfered edges to minimize damage to hardware, rope, or webbing that is attached to the anchorage.1.1 This standard specifies the minimum strength requirements for anchorages permanently installed or attached to training towers or other structures used for rope rescue training. It does not describe how those anchorages are constructed, installed in, or attached to the structure nor does it include any factors of safety. It only specifies the design loads that must be considered.1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

定价： 515元 / 折扣价： 438 元 加购物车

4.1 This guide establishes the minimum requirements for training SWFT-Basic personnel. A person trained to this guide is considered to be a SWFT-Basic.4.2 Every person who is identified as a SWFT-Basic shall have met the requirements or equivalent of this guide.4.3 This guide is to be used by the individuals and Authorities Having Jurisdiction (AHJs) that wish to identify the minimum training required for SWFT-Basic. No advanced skills are included or implied.4.4 This guide was developed specifically for use in the United States, but may be used in other countries as needed.4.5 This guide should be used in conjunction with established and authorized guidelines and procedures mandated by the AHJ.4.6 Nothing in this guide precludes an AHJ from adding additional requirements for its own members.4.7 The AHJ shall determine that personnel, agencies, and organizations are qualified and authorized to participate in swiftwater/flood search and rescue operations.4.8 The AHJ shall determine the evaluation process used to assess the extent to which the requirements of this guide are met.4.9 Swiftwater personnel should only perform activities in the swiftwater environment after a thorough risk assessment and appropriate risk mitigation efforts (such as the use of personal protective equipment (PPE), restricting efforts to shore-based techniques, or delaying a recovery until more favorable water conditions exist) have been performed. At the very least, personnel should follow the appropriate national, federal, state, tribal, provincial, and local safety standards as they apply to activities in swiftwater environments. SWFT-Basic personnel should be supervised by a Swiftwater/Flood Rescue Technician-Intermediate (SWFT-Intermediate) or Swiftwater/Flood Rescue Technician-Advanced (SWFT-Advanced) for in-water rescue operations. Shore-based rescue does not necessarily require SWFT-Intermediate or SWFT-Advanced supervision, but any rescue requires appropriate command and control, determined by the level of complexity. Rescue shall be done using the appropriate safety precautions.1.1 This guide establishes the areas of expertise that Search and Rescue (SAR) Swiftwater/Flood Rescue Technician Basic (SWFT-Basic) personnel shall demonstrate in order to perform in, on, or around a swiftwater environment.1.1.1 Specifically, this guide defines the recommended training required to prepare SWFT-Basic personnel, or equivalent, for responding to or conducting shore-based swiftwater and flood rescue operations.1.1.2 This guide establishes the general areas of expertise that SWFT-Basic personnel shall demonstrate. This guide does not cover specialized types of swiftwater/flood SAR, such as helicopter and boat-based rescues.1.1.3 This guide also establishes the minimum training requirements.1.2 This is the entry-level position for swiftwater/flood responders.1.3 SWFT-Basic personnel shall be able to recognize, reduce, eliminate, or mitigate, within the scope of their training, the hazards and risks in a swiftwater or flood situation or environment and be able to request appropriate additional resources.1.4 This guide identifies types of rescues, tactics, and systems that are typically used by SWFT-Basic personnel, such as shore-based rescues using talking, reaching, throwing, and wading methods.1.5 SWFT-Basic personnel who have met the minimum qualifications and experience within this guide are capable of performing shore-based rescues and assisting with in-water rescues from the shore under qualified supervision.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 646元 / 折扣价： 550 元 加购物车

5.1 Gate Function Load Test—This test verifies that the gate can be opened (with the gate locking mechanism in the unlocked position) and that the gate can not be opened (with the gate locking mechanism in the locked position) while loaded with Function Test Force #1 along the major axis.5.2 Gate Locking Mechanism Function Load Test—This test verifies that the gate locking mechanism can be unlocked, after Function Test Force #2 has been applied along the major axis and released.5.3 Major Axis Gate Closed Function Load Test—This test verifies that the gate functions as originally intended, after Function Test Force #3 has been applied and released.5.4 Major Axis Gate Closed Ultimate Strength Test—This test is intended to show the ultimate strength of the carabiner in the major axis with the gate closed.5.5 Major Axis Gate Open Ultimate Strength Test—This test is intended to show the ultimate strength of the carabiner in the major axis with the gate open.5.6 Minor Axis Gate Closed Ultimate Strength Test—This test is intended to show the ultimate strength of the carabiner in the minor axis with the gate closed.5.7 Corrosion Test—This test is intended to verify that the carabiner is produced from a corrosion-resistant material, or adequately covered with a protective coating.AbstractThis specification covers six mechanical tests, one corrosion resistance test, and the minimum performance requirements for these tests. This specification applies to carabiners designed specifically for use by rescue personnel during both training exercises and actual rescue operations. Two different types of carabiners are defined, a heavy-duty rescue carabiner and a light-duty rescue carabiner. The mechanical tests are: gate function test, gate locking mechanism function load test, major axis gate closed function load test, major axis gate closed ultimate strength test, major axis gate open ultimate strength test, and minor axis gate closed ultimate strength test. Carabiners may disengage or eject parts from the test fixture. Use a safety screen and wear safety glasses while testing.1.1 This specification covers six mechanical tests, one corrosion resistance test, and the minimum performance requirements for these tests. This specification applies to carabiners designed specifically for use by rescue personnel during both training exercises and actual rescue operations. This specification does not apply to recreational use carabiners.1.2 Two different types of carabiners are defined in this specification, a heavy-duty rescue carabiner and a standard-duty rescue carabiner.1.3 Tests contained herein are destructive in nature. Carabiners subjected to any of these tests shall not be used in any way after testing except in evaluation the results of such testing.1.4 This specification does not imply approval of any method of use of rescue carabiners. In addition, the tests described are laboratory tests and do not duplicate field conditions. Furthermore, the test load values contained herein are not to be interpreted as the forces which a rescue carabiner may be subjected to, or may be expected to sustain, in actual field use.1.5 Quality control is solely the responsibility of the manufacturer or purchaser, or both, and is not addressed by this specification.1.6 The values stated in SI units are to be regarded as the standard.1.7 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 590元 / 折扣价： 502 元 加购物车