本文件适用于把控制启动和稳定燃点部件集成为一体的管形荧光灯(自镇流荧光灯)。本文件规定了安全和互换性要求,以及试验方法和检验其是否合格的条件。本文件适用于家庭和类似场合作为普通照明用的灯,且额定电压50 V~250 V,额定频率50 Hz或60 Hz,所用灯头符合IEC 600611的要求。对于本文件未特别提及的灯头灯座系统,由生产者提供的安全相关试验的相关信息适用。本文件的要求只涉及型式试验。关于全部产品检验和批量产品检验的推荐方法在附录A中给出。本文件已根据IEC 62471和IEC TR 624712的要求涵盖光生物安全性。蓝光和红外危害低于要求标识的水平。
定价: 62元 / 折扣价: 53 元 加购物车
This standard specifies the terms and definitions, product classification and model, technical requirements, test methods and inspection rules of double-capped LED lamps with G5 and G13 lamp caps, which are used to replace the same lamp caps and conform to the provisions of GB/T 10682.
This standard is applicable to double-capped LED lamps with rated power of 125 W and below, frequency of 50 Hz, rated voltage of AC 220 V, nominal length of 1 500 mm and below and beam angle of 120° and above (for replacing liner fluorescent lamps).
This kind of double-capped LED lamps is used to replace the double-capped fluorescent lamp without any modification to the luminaire.
The existing luminaire to be installed with replaced double-capped LED lamps could be the with magnetic or electronic controlgear.
NOTE 1 Unless otherwise specified, "lamp" in this standard represents "double-capped LED lamps (for replacing liner fluorescent lamps)".
NOTE 2 The
定价: 588元 / 折扣价: 500 元 加购物车
This standard specifies the terms and definitions, specification classification and nomenclature, technical requirements, test methods and test rules of double-capped integrated LED lamps with G5 or G13 caps and for luminaries with G5 or G13 lamp bases but without ballasts.
This standard is applicable to double-capped integrated LED lamps, having:
—a rated power up to 60 W;
—a frequency of 50 Hz and a rated voltage of AC 220 V;
—a nominal length up to 1 500 mm;
—a beam angle of 120° and above.
This standard is also applicable to modified double-capped integrated LED lamps where modification in the luminarie is required and the ballasts are disconnected.
NOTE 1 Where in this standard the term "lamp(s)" is used, it is unterstood to stand for "double-capped integrated LED lamp(s)", except where it is obviously assigned to other types of lamps.
NOTE 2 The rated voltage is the power supplied to the luminaries.
定价: 516元 / 折扣价: 439 元 加购物车
This standard specifies the terms and definitions, classification and nomenclature, technical requirements, test methods and inspection rules of nondirectional integrated LED filament lamps for general lighting.
This standard is applicable to the nondirectional integrated LED filament lamp with integral means for stable operation components, intended for domestic and similar general lighting purposes.
定价: 588元 / 折扣价: 500 元 加购物车
This standard specifies the classification of non-directional self-ballasted LED-lamps for general lighting services.
This standard applies to the non-directional self-ballasted LED-lamps intended for domestic and similar general lighting purposes, having:
—A rated voltage of AC 220 V, a rated frequency of 50 Hz;
—Screw cap listed in GB/T 1406.1 or bayonet caps listed in GB/T 1406.5.
定价: 348元 / 折扣价: 296 元 加购物车
本文件规定了普通照明用放电灯(荧光灯除外)的安全要求。
本文件适用于低压钠灯和高强度放电灯(HID)即高压汞灯(包括混合灯)、高压钠灯和金属卤化物灯。本文件对单端灯和双端灯均适用,附录A列出了所用灯头型号。
本文件只涉及安全要求,不包括性能要求。性能要求见IEC 60188、IEC 60192、IEC 60662、IEC 61167和IEC 61549。
符合本文件的灯在配以相应镇流器、启动装置和灯具的情况下在90%~110%的额定电源电压下安全地工作,其中镇流器按照IEC 61347-2-9和IEC 60923的要求,启动装置按照IEC 61347-2-1和IEC 60927的要求,灯具按照GB/T 7000.1的要求。
定价: 75元 / 折扣价: 64 元 加购物车

我的标准
购物车
400-168-0010




对不起,暂未有相关搜索结果!










