1.1 This document describes a method for defining requirements and assuring component integrity for plastic parts created using material extrusion based additive manufacturing processes. It relates to the process, equipment and operational parameters. Processes include all material extrusion based additive manufacturing processes. This document is intended for use by AM users and customers procuring such parts. The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, each system needs to be used independently of the other. Combining values from the two systems can result in non-conformance with this document.

定价： 431元 加购物车

1.1 This document gives requirements, guidelines and recommendations for using additive manufacturing (AM) in product design.1.2 It is applicable during the design of all types of products, devices, systems, components or parts that are fabricated by any type of AM system. This document helps determine which design considerations can be utilized in a design project or to take advantage of the capabilities of an AM process.1.3 General guidance and identification of issues are supported, but specific design solutions and process-specific or material-specific data are not supported.1.4 The intended audience comprises three types of users:1.4.1 designers who are designing products to be fabricated in an AM system and their managers;1.4.2 students who are learning mechanical design and computer-aided design; and1.4.3 developers of AM design guidelines and design guidance systems.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

定价： 487元 加购物车

定价： 712元 加购物车

定价： 712元 加购物车

1.1 This document establishes and defines terms used in additive manufacturing (AM) technology, which applies the additive shaping principle and thereby builds physical three-dimensional (3D) geometries by successive addition of material.1.2 The terms have been classified into specific fields of application.1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 506元 加购物车

1.1 This document specifies the features of Directed Energy Deposition (DED) and provides detailed design recommendations. This document also provides a state-of-the-art review of design guidelines associated with the use of DED by bringing together relevant knowledge about this process and by extending the scope of ISO/ASTM 52910. Some of the fundamental principles are also applicable to other additive manufacturing (AM) processes, provided that due consideration is given to process-specific features.1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 843元 加购物车

1.1 This practice is intended to be used to assign part grade across the automotive industry. For this standard the term classification was changed to grade to avoid confusion with existing classifications in the automotive industry.1.2 See Practice F3572 for aviation part classifications and NASA-STD-6030 for spaceflight part classifications.1.3 This practice is applicable to all AM technologies defined in ISO/ASTM 52900 used in automotive.1.4 This practice is intended to be used to establish a metric for AM parts in downstream documents.1.5 This practice is not intended to establish criteria for any downstream processes, but rather to establish a metric that these processes can use.1.6 The part grade metric could be utilized by the engineering, procurement, non-destructive inspection, testing, qualification, or certification processes used for AM automotive parts.1.7 The grading scheme in this practice establishes a consistent methodology to define and communicate the consequence of failure associated with AM automotive parts.1.8 The material or process, or both, in general does not affect the consequence of failure of a part, therefore the grading scheme defined in this document may be used outside AM.1.9 The user of this standard should not assume regulators’ endorsement of this standard as accepted mean of compliance.1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.11 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 515元 加购物车

1.1 This document covers the principal considerations which apply to data exchange for additive manufacturing. It specifies terms and definitions which enable information to be exchanged describing geometries or parts such that they can be additively manufactured. The data exchange method outlines file type, data enclosed formatting of such data and what this can be used for.This document— enables a suitable format for data exchange to be specified,— describes the existing developments for additive manufacturing of 3D geometries,— outlines existing file formats used as part of the existing developments, and— enables understanding of necessary features for data exchange, for adopters of this document.1.2 This document is aimed at users and producers of additive manufacturing processes and associated software systems. It applies wherever additive processes are used, and to the following fields in particular:— producers of additive manufacturing systems and equipment including software;— software engineers involved in CAD/CAE systems;— reverse engineering systems developers;— test bodies wishing to compare requested and actual geometries.1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 487元 加购物车

定价： 927元 加购物车

定价： 487元 加购物车

1.1 This document specifies the features of MEX/P and provides detailed design recommendations.1.2 Some of the fundamental principles are also applicable to other AM processes, provided that due consideration is given to process-specific features.1.3 This document also provides a state of the art review of design guidelines associated with the MEX/P by bringing together relevant knowledge about this process and by supplementing the scope of ISO/ASTM 52910.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 843元 加购物车

定价： 927元 加购物车

定价： 571元 加购物车

1.1 This document provides technical specifications for metallic powders intended to be used in additive manufacturing and covers the following aspects:– documentation and traceability;– sampling;– particle size distribution;– chemical composition;– characteristic densities;– morphology;– flowability;– contamination;– packaging and storage.This document does not deal with safety aspects.In addition, this document gives specific requirements for used metallic powders in additive manufacturing.

定价： 525元 加购物车

3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CNC are not sufficient to be applicable across the full spectrum of additive manufacturing equipment. This terminology expands upon the principles of ISO 841 and applies them specifically to additive manufacturing. Although this terminology is intended to complement ISO 841, if there should arise any conflict, this terminology shall have priority for additive manufacturing applications. For any issues not covered in this terminology, the principles in ISO 841 may be applied.3.2 Furthermore, this terminology does not prescribe the use of any specific existing testing methodologies or standards that practitioners of AM may wish to employ for testing purposes; however, it is expected that practitioners will employ appropriate existing methodologies and standards to test parts made by AM.1.1 This terminology includes terms, definitions of terms, descriptions of terms, nomenclature, and acronyms associated with coordinate systems and testing methodologies for additive manufacturing (AM) technologies in an effort to standardize terminology used by AM users, producers, researchers, educators, press/media, and others, particularly when reporting results from testing of parts made on AM systems. Terms included cover definitions for machines/systems and their coordinate systems plus the location and orientation of parts. It is intended, where possible, to be compliant with ISO 841 and to clarify the specific adaptation of those principles to additive manufacturing.NOTE 1: The applicability of this standard to cladding has to be evaluated. Discussions are under progress.NOTE 2: Non-cartesian systems are not covered by this standard.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 525元 加购物车