This standard serves as the extension of (but not limited to) IEEE Std 1703(TM) with regard to the devices and communications module physical hardware interfaces, reference signals, and their description. IEEE 1704 Communication Modules are described as being attachable and removable to/from the IEEE 1704 Devices.
This Standard is a design and specification standard that covers metallic and plastic lined sealless centrifugal pumps of horizontal, end suction single stage, centerline discharge design. This Standard includes dimensional interchangeability requirements and certain design features to facilitate installation and maintenance and enhance reliability and safety of B73.3 pumps. It is the intent of this Standard that pumps of the same standard dimension designation from all sources of supply shall be interchangeable with respect to mounting dimensions, size, and location of suction and discharge nozzles, input shafts, baseplates, and foundation bolt holes.
This standard defines a Table structure for utility application data to be passed between an End Device and any other device. It neither defines device design criteria nor specifies the language or protocol used to transport that data. The Tables defined in this standard represent a data structure that shall be used to transport the data, not necessarily the data storage format used inside the End Device.
This document is identified by three numbers, MC1218-2009, ANSI C12.18-2006 and IEEE 1701-200X. The standard details the criteria required for communications with a Utility End Device by another device via an optical port. The other device could be a hand held reader, a laptop or portable computer, a master station system, or some other electronic communications device. It shall provide the optical port lower layers communication protocol for the Utility metering Industry including specifically… read more Water, Gas, and Electric. The Standard provides details for a complete implementation of an OSI 7-layer model in accordance with ISO/IEC 7498-1. The protocol specified in this document was designed to transport data in Table format. The Table definitions are in ANSI C12.19 (MC1219, IEEE 1377) Utility Industry End Device Data Tables. read less
This standard details the criteria required for communication between a C12.21 Device and a C12.21 Client via a modem connected to the switched telephone network. The C12.21 Client could be a laptop or portable computer, a master station system, or some other electronic communications device. This standard does not specify the implementation requirements of the telephone switched network to the modem, nor does it include definitions for the establishment of the communication channel. This document provides details for an implementation of the Open Systems Interconnection (OSI) seven-layer model in accordance with ISO/IEC 7498-1. The protocol specified in this standard was designed to transport data in Table format. The Table definitions are in ANSI C12.19 and in Annex D of this document. This standard specifies the differences between ANSI C12.18-2006 and ANSI C12.19-1997 and the features and services required to describe a protocol specification for telephone modem communications.