本标准规定了机动车号牌的分类、规格、颜色、适用范围、式样、技术要求、试验方法、检验规则、包装、更换、放大号和监督管理。
本标准适用于公安机关交通管理部门核发的机动车号牌的制作、检验、核发和监督管理。

定价： 100元 / 折扣价： 85 元 加购物车

本标准规定了职业性急性四乙基铅中毒的诊断及处理原则。
本标准适用于职业活动中由于接触四乙基铅、乙基液或高浓度乙基汽油引起的急性四乙基铅中毒的诊断及处理。

定价： 19元 / 折扣价： 17 元 加购物车

本标准规定了GTS1型数字探空仪的分类与命名、要求、试验方法、检验规则和标志、包装、运输、贮存等要求。 本标准适用于GTS1型数字探空仪(以下简称探空仪)。

定价： 28元 / 折扣价： 24 元 加购物车

This specification covers carbon structural steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes. Heat analysis shall be used to determine the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, and copper. Tensile strength, yield strength, and elongation shall be evaluated using tension test and must conform to the required tensile properties.1.1 This specification2 covers carbon steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes.1.2 Supplementary requirements are provided for use where additional testing or additional restrictions are required by the purchaser. Such requirements apply only when specified in the purchase order.1.3 When the steel is to be welded, a welding procedure suitable for the grade of steel and intended use or service is to be utilized. See Appendix X3 of Specification A6/A6M for information on weldability.1.4 The text of this specification contains notes or footnotes, or both, that provide explanatory material. Such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements.1.5 For structural products produced from coil and furnished without heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting of additional test results, of Specification A6/A6M apply.1.6 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system is to be used independently of the other, without combining values in any way.1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 515元 加购物车

定价： 515元 加购物车

本文件确立了粮油仓储企业防火安全检查方法、内容、程序及防火安全隐患整改要求的总体原则。
本文件适用于粮油仓储企业防火安全自查。

定价： 39元 / 折扣价： 34 元 加购物车

本标准主要以平台为例，规定了城市轨道交通BIM协同管理过程中的各方职责、平台构架和平台使用行为。  本标准适用于建设单位辖下的轨道交通工程协同管理全过程BIM协同应用，其他由建设单位管理实施的工程可参照执行。

定价： 32元 / 折扣价： 28 元 加购物车

本标准规定了单用途商业预付卡从业人员的术语和定义、基本素质要求、技术能力要求。本标准适用于单用途商业预付卡售卡、服务及管理等从业人员。

定价： 19元 / 折扣价： 17 元 加购物车

本文件规定了直播电商售后服务的基本要求、售后服务管理和直播电商服务评价。
本文件适用于直播电商的售后服务工作开展。

定价： 21元 / 折扣价： 18 元 加购物车

本文件规定了广东健康医疗数据脱敏的术语和定义、原则与方法、定义、策略、审计及追踪溯源等技术要求。
本文件适用于指导健康医疗数据控制者对健康医疗数据进行安全保护，也可供健康医疗机构、相关主管部门以及第三方评估机构等组织开展健康医疗数据的安全监督管理与评估等工作时参考。

定价： 24元 / 折扣价： 21 元 加购物车

本文件规定了社会流通领域退役废锂离子电池的收集、贮存、运输、无害化处理、破碎分离、二次资源回收等环节的运行技术及管理要求。
本文件适用于报废后的动力锂离子电池、以及报废后的3C锂离子电池。

定价： 18元 / 折扣价： 16 元 加购物车

本文件描述了测定建设用地土壤污染物铅人体生物有效性的模拟唾液和胃液提取法。
本文件适用于建设用地土壤污染物铅人体生物有效性的测定，描述的测定方法也适用于其他类型土壤污染物铅人体生物有效性的测定。

定价： 31元 / 折扣价： 27 元 加购物车

本文件规定了高速公路经营管理企业开展对标评价的实施步骤，确定了对标策划、实施、结果应用和数据库开发与整理、建设与管理的内容。
本文件适用于高速公路经营管理对标评价的实施和持续改进，可作为高速公路经营管理企业（以下简称企业)自我评价、行业评价和第三方评价的依据。

定价： 49元 / 折扣价： 42 元 加购物车

本文件规定了抗菌防霉无机装饰板的分级和标记、一般要求、技术要求、试验方法、检验规则、包装、标志和贮存。
本文件适用于具有抗菌防霉功能的无机装饰板，其他材质的板材可参照使用。

定价： 19元 / 折扣价： 17 元 加购物车

This specification establishes the requirements brass plates, sheets, strips, and rolled bars made from UNS C21000, C22000, C22600, C23000, C24000, C26000, C26800, C27200, or C28000. Plates are generally available only in the hot-rolled temper. The standard tempers of as hot rolled, rolled, annealed, and annealed-to-temper materials are detailed in this specification as well as in other specifications listed herein. This specification also contains information on the required tensile strengths, Rockwell hardness and grain sizes of the materials. The Rockwell hardness test can be used to test for general conformity to the specification requirements for temper, tensile strength and grain size.1.1 This specification establishes the requirements for brass (copper-zinc alloy) plate, sheet, strip, and rolled bar of the following alloys:Copper AlloyUNS No. Type of Metal   C21000 GildingC22000 Commerical BronzeC22600 Jewerly BronzeC23000 Red BrassC24000 Low BrassC26000 Cartridge BrassC26800 Yellow BrassC27200 …C28000 Muntz Metal1.2 Units—The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.1.3 The following safety hazard caveat pertains only to the test method(s) described in this specification.1.3.1 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 590元 加购物车