
【国外标准】 API Technical Report 17TR3, An Evaluation of the Risks and Benefits of Penetrations in Subsea Wellheads below the BOP Stack
本网站 发布时间:
2025-06-05
- API TR 17TR3
- 定价:
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
Provides an evaluation of the risks and benefits of allowing penetrations in subsea wellheads below the blowout preventer (BOP) stack so annuli other than the production tubing (commonly referred to as the "A" annulus) could be monitored.
标准号:
API TR 17TR3
标准名称:
API Technical Report 17TR3, An Evaluation of the Risks and Benefits of Penetrations in Subsea Wellheads below the BOP Stack
英文名称:
API Technical Report 17TR3, An Evaluation of the Risks and Benefits of Penetrations in Subsea Wellheads below the BOP Stack标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM C957/C957M-17(2024) Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Integral Wearing Surface
- ASTM D2555-17a(2024)e1 Standard Practice for Establishing Clear Wood Strength Values
- ASTM D7065-17(2024) Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry
- ASTM D7731-17(2024) Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
- ASTM D8028-17(2024) Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID)
- ASTM E3124-17 Standard Test Method for Measuring System Latency Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose
- ASTM F2890-17(2024) Standard Guide for Hazard Awareness for Search and Rescue Personnel
- ASTM D3368-17(2022) Standard Specification for FEP Sheet and Film
- ASTM D3373-17 Standard Test Method for Vanadium in Water
- ASTM D3543-17 Standard Test Method for Metal Glide Adhesion
- ASTM D3550/D3550M-17 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
- ASTM D3551-17 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
- ASTM D3552-17 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
- ASTM D3557-17 Standard Test Methods for Cadmium in Water
- ASTM D3574-17 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams