【国外标准】 Standard Guide for Forensic Examination of Dyes in Textile Fibers by Thin-Layer Chromatography
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
5.1 TLC is an inexpensive and simple technique that could be used to complement other analytical techniques within a general analytical scheme related to forensic fiber examination.5.2 Consider the forensic analysis of fiber colorants using TLC for single fiber comparisons only when the sample size is adequate (that is, enough colorant can be extracted for analysis) and it is not possible to discriminate between the fibers of interest using other techniques, such as comparison microscopy and MSP. Larger fibrous units (for example, thread or tuft) can be treated as an individual sample if determined to be homogeneous. Do not treat fibers that cannot be directly related to each other as a collective sample for the purposes of TLC.5.3 The extraction procedures carried out prior to TLC analysis can provide useful information about dye classification. TLC can provide qualitative information about dye components. Similar colors made up of different dye components can be differentiated using this technique. The application of TLC may serve to discriminate between fibers or it may support the possibility of fibers sharing a common source.5.4 TLC can be prohibitively difficult or undesirable in some circumstances. Short lengths of fibers or pale-colored fibers can lack adequate amounts of colorant necessary to be examined by TLC. Dye extraction from some fibers can be impossible (2, 3). Some fiber types do not truly extract, but change or lose color. Reactive dyes are covalently bonded to the fiber and typically cannot be removed by conventional extraction methods, but can be released from cotton and wool by disrupting the fiber by enzymatic or chemical digestion, respectively (1). The desire to preserve evidence from deleterious change or for possible analysis by another examiner can preclude removing the color or employing a destructive method for analysis.1.1 This guide is intended as an overview of the Thin-Layer Chromatography (TLC) of fiber colorants (or individual dye components) present in dyed fibers. It is intended to be applied within the scope of a broader analytical scheme for the forensic analysis of fiber samples. TLC could provide information that cannot be obtained through other color analyses (such as microspectrophotometry (MSP)) (1).21.2 This standard is intended for use by competent forensic science practitioners with the requisite formal education, discipline-specific training (see Practice E2917), and demonstrated proficiency to perform forensic casework (see Practice E3255).1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E2227-23e1
标准名称:
Standard Guide for Forensic Examination of Dyes in Textile Fibers by Thin-Layer Chromatography
英文名称:
Standard Guide for Forensic Examination of Dyes in Textile Fibers by Thin-Layer Chromatography标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- BS EN IEC 61753-071-02:2020+A1:2024 Fibre optic interconnecting devices and passive components. Performance standard
- 24/30492859 DC BS EN IEC 61753-1 Fibre optic interconnecting devices and passive components - Performance standard
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- 24/30485973 DC standard
- BS EN 14662-1:2023 - TC Tracked Changes. Ambient air quality. Standard method for measurement of benzene concentrations