
【国外标准】 IEEE Standard for a Smart Transducer Interface for Sensors and Actuator -- Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats
本网站 发布时间:
2025-04-28
- IEEE 1451.5-2007
- 定价: 134元 / 折扣价: 114 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This project establishes a standard for wireless communication methods and data format for transducers (sensors and actuators). The standard defines a TEDS based on the IEEE 1451 concept and protocols to access TEDS and transducer data. It adopts necessary wireless interfaces and protocols to facilitate the use of technically differentiated, existing wireless technology solutions. It does not specify transducer design, signal conditioning, wireless system physical design or use, or use of TEDS.
标准号:
IEEE 1451.5-2007
标准名称:
IEEE Standard for a Smart Transducer Interface for Sensors and Actuator -- Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D2007-19(2024)e1 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
- ASTM E2007-10(2023) Standard Guide for Computed Radiography
- AS/NZS 60745.2.5:2011 Hand-held motor-operated electric tools - Safety Particular requirements for circular saws
- AS/NZS 61000.4.34:2007 Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase (IEC 61000-4-34, Ed. 1.0 (2005) MOD)
- AS/NZS 61000.6.4:2007 Electromagnetic compatibility (EMC) Generic standards - Emission standard for industrial environments
- AS/NZS 61184:2007 Bayonet lampholders (IEC 61184, Ed. 2.0 (1997) MOD)
- AS/NZS 61241.10:2005/Amdt 1:2007 Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present
- AS/NZS 61241.14:2005/Amdt 4:2007 Electrical apparatus for use in the presence of combustible dust Selection and installation
- AS/NZS 61347.2.2:2007 Lamp controlgear Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps (IEC 61347-2-2, Ed. 1.2 (2006) MOD)
- AS/NZS 61558.1:2000/Amdt 6:2007 Safety of power transformers, power supply units and similar General requirements and tests
- AS/NZS 61779.5:2000 Electrical apparatus for the detection and measurement of flammable gases Performance requirements for group II apparatus indicating a volume fraction up to 100% gas
- AS/NZS CISPR 16.1.5:2004 Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1000 MHz
- AS/NZS ISO 3834.5:2008 Quality requirements for fusion welding of metallic materials Documents with which it is necessary to conform to claim conformity to the quality requirements of AS/NZS ISO 3834.2, AS/NZS ISO 3834.3 or AS/NZS ISO 3834.4
- AS/NZS ISO 8980.5:2011 Ophthalmic optics - Uncut finished spectacle lenses Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant
- AS/NZS ISO/IEC 14763.3:2007 Telecommunications installations - Implementation and operation of customer premises cabling Testing of optical fibre cabling