
【国外标准】 IEEE Standard for Design, Test, and Application Requirements for Microprocessor-Based Controls of Distribution Pad-mount, Dry Vault, Wet Vault, and Polemount Switchgear Rated Above 1 kV and Up to and Including 38 kV
本网站 发布时间:
2025-04-28
- IEEE C37.68-2023
- 定价: 63元 / 折扣价: 54 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This standard presents basic requirements for the design, testing, and application of microprocessor-based controls of distribution switchgear rated above 1 kV and up to and including 38 kV. The standard is intended to mitigate the effects of the harsh environments that may be encountered outside the protections provided by a typical substation. This standard applies to microprocessor-based devices employed in distribution switchgear typically mounted on power poles, in wet or dry vaults, or in… read more pad-mounted switchgear enclosures. This standard does not apply to microprocessor-based devices employed in high voltage circuit breakers (IEEE Std C37.04™, Standard for Ratings and Requirements for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V) or metal-enclosed switchgear [IEEE Std C37.20.2™, Standard for Metal-Clad Switchgear and IEEE Std C37.20.3™, Standard for Metal-Enclosed Interrupter Switchgear (1 kV- 38 kV)]. This standard does not invalidate any tests performed on power system protective relays which are designed to IEEE Std C37.90™, Standard for Relays and Relay Systems Associated with Electric Power Apparatus. Lastly, this standard does not cover the design of the control enclosure such as mounting, latching, or user accessibility, and does not supersede the requirements of controls which are defined and tested per the switchgear equipment standard. read less
标准号:
IEEE C37.68-2023
标准名称:
IEEE Standard for Design, Test, and Application Requirements for Microprocessor-Based Controls of Distribution Pad-mount, Dry Vault, Wet Vault, and Polemount Switchgear Rated Above 1 kV and Up to and Including 38 kV
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM C1134-23 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
- ASTM C1136-23 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
- ASTM C1138M-19 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
- ASTM C1147-14(2022) Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
- ASTM C1152/C1152M-20 Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
- ASTM C1153-23 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
- ASTM C1156-18 Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
- ASTM C1157/C1157M-23 Standard Performance Specification for Hydraulic Cement
- ASTM C1161-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1165-23 Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode
- ASTM C1168-23 Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis
- ASTM C117-23 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
- ASTM C1170/C1170M-20 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
- ASTM C1173-22 Standard Specification for Flexible Transition Couplings for Underground Piping Systems
- ASTM C1174-20 Standard Guide for Evaluation of Long-Term Behavior of Materials Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste