- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- CSA >>
- CAN/CSA-CEI/IEC 61000-4-7-03 Electromagnetic Compatibility (EMC) - Part 4-7: Testing and Measurement Techniques - General Guide on Harmonics and Interharmonics Measurements and Instrumentation, for Power Supply Systems and Equipment Connected Thereto (Adopted CEI/IEC 61000-4-7:2002,

【国外标准】 Electromagnetic Compatibility (EMC) - Part 4-7: Testing and Measurement Techniques - General Guide on Harmonics and Interharmonics Measurements and Instrumentation, for Power Supply Systems and Equipment Connected Thereto (Adopted CEI/IEC 61000-4-7:2002,
本网站 发布时间:
- CAN/CSA-CEI/IEC 61000-4-7-03
- 现行
- 定价: 1138元 / 折扣价: 968 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1 Scope
This part of IEC 61000 is applicable to instrumentation intended for
measuring spectral components in the frequency range up to 9 kHz which are superimposed on the fundamental of the power supply systems at 50 Hz and 60 Hz.
For practical cons
标准号:
CAN/CSA-CEI/IEC 61000-4-7-03
标准名称:
Electromagnetic Compatibility (EMC) - Part 4-7: Testing and Measurement Techniques - General Guide on Harmonics and Interharmonics Measurements and Instrumentation, for Power Supply Systems and Equipment Connected Thereto (Adopted CEI/IEC 61000-4-7:2002,
英文名称:
Electromagnetic Compatibility (EMC) - Part 4-7: Testing and Measurement Techniques - General Guide on Harmonics and Interharmonics Measurements and Instrumentation, for Power Supply Systems and Equipment Connected Thereto (Adopted CEI/IEC 61000-4-7:2002,标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 其它标准
- 上一篇: CAN/CSA-CEI/IEC 61000-4-6-01 (R2005) Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 6: Immunity to Conducted Disturbances, Induced by Radio-Frequency Fields (Adopted CEI/IEC 1000-4-6:1996, first edition, 1996-03, including Corrigendum September 199
- 下一篇: CAN/CSA-CEI/IEC 61000-4-8-02 Electromagnetic Compatibility (EMC) - Part 4-8: Testing and Measurement Techniques - Power Frequency Magnetic Field Immunity Test (Adopted CEI/IEC 61000-4-8:1993 + A1:2000, edition 1.1, 2001-03)
- 推荐标准
- ASTM D6889-03(2024) Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
- ASTM D3657-03(2021) Standard Specification for Zipper Dimensions
- ASTM D3767-03(2020) Standard Practice for Rubber—Measurement of Dimensions
- ASTM D3929-03(2023) Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
- ASTM D4695-03(2020) Standard Guide for General Pavement Deflection Measurements
- ASTM D4781-03(2018)e1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM D4788-03(2022) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
- ASTM D4827-03(2022) Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
- ASTM D5107-03(2022) Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone
- ASTM D5200-03(2021) Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans
- ASTM D5395-03(2023) Standard Specification for Reclaimed Methylene Chloride
- ASTM D5401-03(2022) Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood
- ASTM D5960-03(2023) Standard Specification for Technical Grade Ethylene Dichloride
- ASTM D6049-03(2022) Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
- ASTM D6175-03(2019) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles