【国外标准】 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings (Withdrawn 2023)

This specification covers minimum photometric requirements for newly applied photoluminescent (phosphorescent) safety materials used to provide supplemental markings of escape routes, emergency equipment, and obstructions along the escape route. This specification does not cover potentially diminished performance due to wear and tear and aging. The photoluminescent safety materials shall be tested and shall conform to optical requirements and to the specified values of on-site luminance, activation, and marking width.1.1 This specification covers minimum performance requirements for newly applied photoluminescent (phosphorescent) safety materials used to provide supplemental markings of escape routes, emergency equipment, and obstructions along the escape route. (see also Test Method E2073 and Guide E2030).1.2 This specification establishes minimum luminance values for photoluminescent (phosphorescent) markings.1.3 This specification applies to all types of photoluminescent (phosphorescent) markings, including but not limited to plastics, coatings, ceramics, films, etc.1.4 This specification does not cover potentially diminished performance due to wear and tear and aging.1.5 This specification applies only to photoluminescent (phosphorescent) markings emitting the majority of spectral energy within the 515 to 535 nanometer range.1.6 When reference is made regarding photoluminescence in the text of this standard, it implies phosphorescence.1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.