【国外标准】 IEEE Trial Use Guide for loading Mineral-Oil Immersed Power Transformers Rated in Excess of 100 MVA (65 Degree C Winding Rise)
本网站 发布时间:
2025-10-27
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
适用范围:
This guide covers general recommendations for loading mineral-oil-immersed power transformers manufactured in accordance with ANSI/IEEE C57.12.00-1980 [lP and having a maximum nameplate rating in excess of 100 MVA (three phase) or 33+ MVA (single phase). Such transformers have an average winding rise of 65 DC maximum and a hottestipot rise of 80 DC maximum at rated load. NOTE: When this guide is to be used for transformers purchased prior to publication of the guide, the applicability of 2.5… read more and 4.3 should be checked with the manufacturer. Also see Appendix D read less
标准号:
IEEE 756-1984
标准名称:
IEEE Trial Use Guide for loading Mineral-Oil Immersed Power Transformers Rated in Excess of 100 MVA (65 Degree C Winding Rise)
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM A756-17(2022) Standard Specification for Stainless Anti-Friction Bearing Steel
- AS 1828-1984 Electrical equipment for explosive atmospheres - Cable glands
- AS 1946-1984/Amdt 1-1985 Hypodermic equipment - Single-use needles (sterile) for general medical use
- AS 2160-1984 Contract for the supply and construction of a swimming pool
- AS 2489.11-1984 Methods for the analysis of zircon sand concentrates Determination of acid demand value
- AS 2507-1984 The storage and handling of pesticides
- AS 2542.1.2-1984 Sensory analysis of foods General guide to methodology - Types and choice of test
- AS 2699-1984 Wall ties for masonry construction (incorporating Amdt 1 1986)
- AS 2701.1-1984 Methods of sampling and testing mortar for masonry construction Scope and general
- AS 2701.10-1984 Methods of sampling and testing mortar for masonry construction Methods for chemical analysis of mortars
- AS 2701.6-1984 Methods of sampling and testing mortar for masonry construction Method for determination of consistency - Cone impression test
- AS 2706-1984 Numerical values - Rounding and interpretation of limiting values
- AS 2718 (Pt 1 to 2)-1984 Plastics pipes and fittings for gas reticulation - Polyethylene - Outside diameter series
- AS 2724.3-1984 Ambient air - Particulate matter Determination of total suspended particulates (TSP) - High volume sampler gravimetric method
- AS 2735-1984 Dry-type power transformers
我的标准
购物车
400-168-0010










