
【国外标准】 Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Electrically Operated Hospital Beds (Adopted CEI/IEC 601-2-38:1996, first edition, 1996-10, including Amendment 1:1999)
本网站 发布时间:
- CAN/CSA-C22.2 NO. 60601-2-38-03
- 现行
- 定价: 1365元 / 折扣价: 1161 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1 Scope and object
This clause of the General Standard applies, except as follows:
1.1 Scope Addition:
This Particular Standard specifies requirements for safety of
ELECTRICALLY OPERATED HOSPITAL BEDS, hereinafter referred to as BED, as defined in 2.
标准号:
CAN/CSA-C22.2 NO. 60601-2-38-03
标准名称:
Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Electrically Operated Hospital Beds (Adopted CEI/IEC 601-2-38:1996, first edition, 1996-10, including Amendment 1:1999)
英文名称:
Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Electrically Operated Hospital Beds (Adopted CEI/IEC 601-2-38:1996, first edition, 1996-10, including Amendment 1:1999)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 其它标准
- 上一篇: CAN/CSA-C22.2 NO. 60601-2-37A-03 Amendment 1:2005 to CAN/CSA-C22.2 No. 60601-2-37-03, Medical Electrical Equipment - Part 2-37: Particular Requirements for the Safety of Ultrasonic Medical Diagnostic and Monitoring Equipment (Adopted Amendment 1:2004 to IEC 60601-2-37:2001)
- 下一篇: CAN/CSA-C22.2 NO. 60601-2-4-04 Medical Electrical Equipment - Part 2-4: Particular Requirements for the Safety of Cardiac Defibrillators (Adopted CEI/IEC 60601-2-4:2005, second edition, 2002-08) | Appareils électromédicaux - Partie 2-4: Règles particulières de sécurité pour les défibri
- 推荐标准
- ASTM C1130-24 Standard Practice for Calibration of Thin Heat Flux Transducers
- ASTM C1154-24 Standard Terminology for Fiber-Reinforced Cement Products
- ASTM C1227-24 Standard Specification for Precast Concrete Septic Tanks
- ASTM C1242-23c Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
- ASTM C1256-25 Standard Practice for Interpreting Glass Fracture Surface Features
- ASTM C1363-24 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
- ASTM C1558-24 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
- ASTM C1613-24 Standard Specification for Precast Concrete Gravity Grease Interceptor Tanks
- ASTM C1668-24 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
- ASTM C1702-23e1 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM C1710-24 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
- ASTM C1774-24 Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems
- ASTM C1937-24 Standard Specification for Layered, Glass Fiber Felt Pipe and Board Insulation
- ASTM C31/C31M-24a Standard Practice for Making and Curing Concrete Test Specimens in the Field
- ASTM C390-08(2024) Standard Practice for Sampling and Acceptance of Thermal Insulation Lots