
【国外标准】 Identification cards - Integrated circuit(s) cards with contacts - Part 3: Electronic interface and transmission protocols
本网站 发布时间:
2024-08-08
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
Specifies the power and signal structures, and information exchange between an integrated circuit card and an interface device such as a terminal. It also covers signal rates, voltage levels, current values, parity convention, operating procedure, transmission mechanisms and communication with the card. It does not cover information and instruction content, such as identification of issuers and users, services and limits, security features, journaling and instruction definitions.
标准号:
INCITS/ISO/IEC 7816-3:2006 (R2022)
标准名称:
Identification cards - Integrated circuit(s) cards with contacts - Part 3: Electronic interface and transmission protocols
英文名称:
Identification cards - Integrated circuit(s) cards with contacts - Part 3: Electronic interface and transmission protocols标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: INCITS/ISO/IEC 7816-3:2006 (R2017) Identification cards - Integrated circuit(s) cards with contacts - Part 3: Electronic interface and transmission protocols
- 下一篇: INCITS/ISO/IEC 7816-4:2013 (2016) Identification cards - Integrated circuit cards - Part 4: Organization, security and commands for interchange
- 推荐标准
- AS 4024.1201-2006 Safety of machinery General principles - Basic terminology and methodology
- AS 4024.1301-2006 Safety of machinery Risk assessment - Principles of risk assessment
- AS 4024.1302-2006 Safety of machinery Risk assessment - Reduction of risks to health and safety from hazardous substances emitted by machinery - Principles and specifications for machinery manufacturers
- AS 4024.1601-2006 Safety of machinery Design of controls, interlocks and guarding - Guards - General requirements for the design and construction of fixed and movable guards
- AS 4024.1702-2006 Safety of machinery Human body measurements - Principles for determining the dimensions required for openings for whole body access into machinery
- AS 4024.1703-2006 Safety of machinery Principles for determining the dimensions required for access openings
- AS 4024.1801-2006 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs
- AS 4024.1902-2006 Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Displays
- AS 4024.1903-2006 Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Control actuators
- AS 4024.1905-2006 Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for marking
- AS 4024.1906-2006 Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for the location and operation of actuators
- AS 4025.3-1993 Paints for equipment including ships Solvent-borne - Interior and exterior - Semi-gloss enamel
- AS 4030.3-2002 Lead sulfide concentrates - Chemical analysis Determination of silver and gold contents - Fire assay and flame atomic absorption method using scorification or cupellation
- AS 4032.2-2005 (R2015)/Amdt 1-2006 Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices
- AS 4046.3-1992 Methods of testing roof tiles Determination of transverse strength