
【国外标准】 Synthetic-resin bonded fabric sheet for electrical and mechanical purposes
本网站 发布时间:
2023-02-15
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
BS 972:1941
标准名称:
Synthetic-resin bonded fabric sheet for electrical and mechanical purposes
英文名称:
Synthetic-resin bonded fabric sheet for electrical and mechanical purposes标准状态:
被代替-
发布日期:
2021-04-28 -
实施日期:
出版语种:
- 其它标准
- 上一篇: BS 9728:1978 Sectional specification for power transformers of assessed quality for use in electronic equipment: full assessment level
- 下一篇: BS 9730:1983 Sectional specification for power transformers of assessed quality for switched mode power supplies (SMPS) for use in electronic equipment: full assessment level
- 推荐标准
- ASTM B972-10(2020)e1 Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application
- ASTM C972-24 Standard Test Method for Compression-Recovery of Tape Sealant
- ASTM D1941-21 Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume
- ASTM D972-24 Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
- ASTM E1941-10(2024) Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
- ASTM F1941/F1941M-16 Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric
- ASTM F1941/F1941M-16(2025) Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric
- KS M 1941 공업용 부타디엔 - 활성 tert - 부틸 - 카테콜(TBC) [4-(1,1 - 디메틸에틸) - 1,2 벤젠디올]의 측정 - 고속 액체 크로마토그래피법
- ASTM E1941-10(2024) Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
- ASTM E1941-10(2016) Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
- ASTM E972-96(2021) Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight
- ASTM A972/A972M-00(2021) Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
- ASTM C1941-24 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers for Jacking
- ASTM D972-22 Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
- ASTM F1941M-07 Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric] (Withdrawn 2015)