
【国外标准】 Standard Test Method for Volatile Organic Compound (VOC40) Content of Non-Heatset Paste Printing Ink Systems at 40 °C (Withdrawn 2001)
本网站 发布时间:
2024-02-28
- ASTM D5328-92(1997)
- Withdrawn, No replacement
- 定价: 0元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 This test method covers the determination of the volatile organic compound (VOC40) content of non-heatset printing ink systems of the paste type using a baking cycle of 1 h at 40°C. 1.2 This test method is applicable to paste printing inks and vehicles that dry primarily by absorption, polymerization, or related means without the application of heat. Such systems do not contain appreciable quantities of low-boiling solvents that evaporate readily at ordinary room temperatures. Note 1-The 40°C baking temperature in this test method is the same as that specified in Bay Area Method 30. The temperature of heating is 110°C in several related test methods, for example, D2369, D4713 and EPA Reference Method 24. VOC determinations are reviewed in ASTM Manual Series MNL 4. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM D5328-92(1997)
标准名称:
Standard Test Method for Volatile Organic Compound (VOC40) Content of Non-Heatset Paste Printing Ink Systems at 40 °C (Withdrawn 2001)
英文名称:
Standard Test Method for Volatile Organic Compound (VOC40) Content of Non-Heatset Paste Printing Ink Systems at 40 °C (Withdrawn 2001)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ASTM D5327-97(2021)e1 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
- 下一篇: ASTM D5329-20 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements
- 推荐标准
- AS 3947.4.2-1997 Low-voltage switchgear and controlgear Contactors and motor starters - A.C. semiconductor motor controllers and starters
- AS 3972-1997/Amdt 1-2007 Portland and blended cements
- AS 4000-1997/Amdt 1-1999 General conditions of contract
- AS 4000/A-1997 (Reference Use Only) General conditions of contract (AS 4000-1997) - Annexure Part A
- AS 4086.2-1997 Secondary batteries for use with stand-alone power systems Installation and maintenance
- AS 4214.4-1995/Amdt 1-1997 Gaseous fire extinguishing systems - FM-200 (HFC-227ea) Systems
- AS 4214.5-1995/Amdt 1-1997 Gaseous fire extinguishing systems - NAF S-III (HCFC Blend A) Total flooding systems
- AS 4288(Int)-1995/Amdt 1-1997 Soft underlays for textile floor coverings
- AS 4292.4-1997 Railway safety management Signalling and telecommunications systems and equipment
- AS 4435.4-1997 Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. Definitions, test methods and acceptance criteria for post insulator units
- AS 4457-1997 Earth-moving machinery - Off-highway rims and wheels - Maintenance and repair
- AS 4458-1997 (R2016)/Amdt No. 1-1999 Pressure equipment - Manufacture
- AS 4459.4-1997 Methods of sampling and testing ceramic tiles Determination of modulus of rupture and breaking strength
- AS 4459.8-1997 Methods of sampling and testing ceramic tiles Determination of linear thermal expansion
- AS 4479.1-1997 Analysis of soils Pretreatment of potentially contaminated soil samples for heavy metal and metalloid analysis