
【国外标准】 Information technology - Office equipment - Print quality attributes for machine readable Digital Postage Marks
本网站 发布时间:
2024-08-08
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
Specifies two methodologies for the measurement of specific print quality attributes of two-dimensional bar code symbols printed within the requirements of Digital Postage Marks. One of these methodologies is applicable to multi-row bar code symbologies and the other to two-dimensional matrix symbologies. Defines methods for grading print quality attributes and deriving an overall assessment of symbol quality. Gives information on possible causes of deviation from optimum grades so as to assist users and postal operators in taking appropriate corrective action.
标准号:
INCITS/ISO/IEC 18050:2006 (R2023)
标准名称:
Information technology - Office equipment - Print quality attributes for machine readable Digital Postage Marks
英文名称:
Information technology - Office equipment - Print quality attributes for machine readable Digital Postage Marks标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: INCITS/ISO/IEC 18050:2006 (R2018) Information technology -- Office equipment -- Print quality attributes for machine readable Digital Postage Marks
- 下一篇: INCITS/ISO/IEC 18092:2013 (R2020) Information technology -- Telecommunications and information exchange between systems -- Near Field Communication -- Interface and Protocol (NFCIP-1)
- 推荐标准
- ASTM D6515-00(2023)e1 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
- ASTM D6525/D6525M-18(2023) Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
- ASTM D6570-18a(2023)e1 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
- ASTM D6580-17(2023) Standard Test Method for The Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
- ASTM D6600-00(2023) Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
- ASTM D6637/D6637M-15(2023) Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
- ASTM D6643-01(2023) Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance
- ASTM D6694/D6694M-15(2023) Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems
- ASTM D6741-10(2023) Standard Test Methods for Silanes Used in Rubber Formulations(bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
- ASTM D6753/D6753M-02(2023) Standard Specification for Coal Tar Adhesive
- ASTM D6786-15(2023) Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
- ASTM D6787/D6787M-02(2023) Standard Specification for Repositionable Note Pad
- ASTM D6788-02(2023) Standard Specification for Repositionable Pressure-Sensitive Flags
- ASTM D6805-02(2023) Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/ Aliphatic Ratio of Bituminous Emulsions
- ASTM D6827-02(2023) Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)