【国外标准】 Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
5.1 This practice is intended for the collection of samples of skin contamination to be used for the estimation of dermal exposure to metals and metalloids. The practice is meant for use in the collection of dermal samples that are of interest in hazard evaluation, risk assessment, or other purposes. This practice is meant to provide a standardized means for estimating exposures to body parts that are potentially exposed via dermal contact with airborne or surface contaminants, or both.5.2 The techniques described in this practice may not accurately reflect the transferability or bioavailability of metal or metalloid residues by way of dermal contact.5.3 Additional information on the principles and methods for the measurement of dermal exposure can be found in ISO TR 14294.1.1 This practice describes a procedure for the wet wiping of potentially exposed skin of workers for the subsequent determination of metals and metalloids.NOTE 1: For guidance on collection of wipe samples on surfaces other than skin, refer to Guide D7659.1.2 This practice does not address the sampling design criteria that are used for hazard evaluation, risk assessment, or other purposes.1.3 This practice contains notes that are explanatory and are not part of the mandatory requirements of this practice.1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.5 This practice offers a set of instructions for performing one or more specific operations. This practice cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This practice is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this practice be applied without consideration of a project’s many unique aspects. The word “Standard” in the title means only that the practice has been approved through the ASTM consensus process.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D7822-18
标准名称:
Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids
英文名称:
Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ASTM D7821-12(2018) Standard Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)
- 下一篇: ASTM D7823-20 Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry
- 推荐标准
- 国家标准计划
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- 24/30485973 DC standard
- BS EN 14662-1:2023 - TC Tracked Changes. Ambient air quality. Standard method for measurement of benzene concentrations
- KS C IEC 61837-2 주파수 제어 및 선택을 위한 표면 실장형 압전 장치 — 표준 아웃라인 및 단자 리드 연결 — 제2부: 세라믹 함체
- 24/30485462 DC BS EN IEC 61753-1 Fibre optic interconnecting devices and passive components - Performance standard