
【国外标准】 Standard Guide for in vitro Osteoblast Differentiation Assays
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 This guidance document describes the components and conditions used for in vitro osteoblast differentiation assays that can be used to screen for the osteogenic capability of progenitor stem cells from various human or animal sources, including mixed tissue-derived connective tissue progenitor populations, or cell populations that may be selectively isolated or manipulated through culture expansion, processing, transfection, or genetic modification.4.2 The osteoblast differentiation assay may be referred to as an osteogenesis assay or a mineralization assay.4.3 It is important to carefully select the components and conditions used for in vitro osteoblast differentiation assays since high amounts of osteogenic medium components can lead to dystrophic, pathologic, or artifactual calcium-based precipitates that do not indicate differentiation of the cells in culture to functional osteoblasts (1).4 For example, when high concentrations of beta-glycerophosphate are used in the medium to function as a substrate for the enzyme alkaline phosphatase secreted by the cells, there is a marked increase in free phosphate, which then precipitates with Ca++ ions in the media to form calcium phosphate crystals independently of the differentiation status of the progenitor cell (2, 3).4.4 Alkaline phosphatase production is an early event associated with osteoblast differentiation, but it can also be stimulated in other cell types by the addition of the osteogenic supplement dexamethasone to the medium. Alkaline phosphatase enhances the formation of calcified deposits prior to their natural occurrence in bone that typically coincides with bone sialoprotein and osteocalcin expression by mineralized matrix-producing osteoblasts. These kinds of calcified/mineral deposits are thus considered dystrophic, pathologic, or artifactual because they were not initiated by a mature osteoblast. A calcium measurement, such as that described in Practice F2997 for the Quantification of Calcium Deposits in Osteogenic Culture of Progenitor Cells Using Fluorescent Image Analysis, may thus result in a potentially false interpretation of the differentiation status of osteoprogenitor cells if used in isolation without gene or protein expression data.4.5 In addition to screening for multipotentiality of undifferentiated stem cells, osteoblast differentiation assays are useful for assessing the osteoinductivity of cell culture substrates or biomaterial scaffolds or drugs or biomolecules, such as cytokines or growth factors.4.6 In vitro osteoblast differentiation assays are not predictive of in vivo bone formation, but are useful for comparison purposes to standardize performance between different types, sources or passages of progenitor cells, biomaterials, or types and concentrations of biomolecules.1.1 This document provides guidance on how to conduct in vitro osteoblast differentiation assays with progenitor stem cells including mesenchymal stromal cells.1.2 This document describes the roles of various osteogenic supplements that are added to the cell culture medium of an osteoblast differentiation assay to encourage and support the differentiation of progenitor cells into matrix-producing osteoblasts.1.3 This document provides recommendations for the concentrations of osteogenic supplements that may prevent the precipitation of artifactual mineral deposits that are not directly produced by osteoblasts, nor correlated with osteoblastic gene expression of the cells.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F3106-22
标准名称:
Standard Guide for in vitro Osteoblast Differentiation Assays
英文名称:
Standard Guide for in vitro Osteoblast Differentiation Assays标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ASTM F3105-20 Standard Specification for Externally Loaded Strength Training Equipment, Strength Training Benches and External Weight Storage Equipment
- 下一篇: ASTM F3107-14(2023) Standard Test Method for Measuring Accuracy After Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems
- 推荐标准
- ASTM F3016/F3016M-19 Standard Test Method for Surrogate Testing of Vehicle Impact Protective Devices at Low Speeds
- ASTM F3019/F3019M-19 Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners
- ASTM F302-09(2021) Standard Practice for Field Sampling of Aerospace Fluids in Containers
- ASTM F3021-17 Standard Specification for Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments
- ASTM F3022-16e1 Standard Test Method for Evaluating the Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments
- ASTM F3023-18 Standard Test Methods for Evaluating Design and Performance Characteristics of Stationary Upright and Recumbent Exercise Bicycles and Upper and Total Body Ergometers
- ASTM F3026-14(2019) Standard Guide for Helicopter Inland Search and Rescue (SAR) Crew Chief
- ASTM F3027-18 Standard Guide for Training of Personnel Operating in Mountainous Terrain (Mountain Endorsement)
- ASTM F3033-16(2021) Standard Practice for Installation of a Single-Sized, Cured-In-Place Liner Utilizing an Inflatable Bladder for Resurfacing Manhole Walls of Various Shapes and Sizes
- ASTM F3034-21 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)
- ASTM F3035-22 Standard Practice for Production Acceptance in the Manufacture of a Fixed Wing Light Sport Aircraft
- ASTM F3036-21 Standard Guide for Testing Absorbable Stents
- ASTM F3038-21 Standard Test Method for Timed Evaluation of Forced-Entry-Resistant Systems
- ASTM F3043-15 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
- ASTM F3045-21 Standard Test Method for Evaluation of the Type and Viscoelastic Stability of Water-in-oil Mixtures Formed from Crude Oil and Petroleum Products Mixed with Water