
【国外标准】 IEEE Trial-Use Standard for Dielectric Test Requirements for Power Transformers for Operation at System Voltages from 115 kV Through 230 kV
本网站 发布时间:
2025-04-28
- IEEE C57.12.14-1982 [ Withdrawn ]
- 定价: 53元 / 折扣价: 46 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 This standard prescribes insulation levels and dielectric test requirements for power transformers where : (1) The transformer insulation levels and dielectric test requirements are explicitly specified to be in accordance with this standard (2) The transformers are to be operated at system voltages from 115 kV through 230 kV (3) The transformer has a rating, either singlephase or three-phase, equal to or greater than 30 000 kVA self-cooled or 50 000 kVA forcedcooled 1.2 These requirements,… read more when specified, supersede all requirements relative to insulation levels and dielectric tests as contained in ANSI/ IEEE C57.12.00-1980 [4] ' and ANSI/IEEE C57.12.90-1980 [ 51. 1.3 Unless explicitly specified, this standard shall be considered as excluded in the event of any blanket reference to all current standards. read less
标准号:
IEEE C57.12.14-1982 [ Withdrawn ]
标准名称:
IEEE Trial-Use Standard for Dielectric Test Requirements for Power Transformers for Operation at System Voltages from 115 kV Through 230 kV
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM E1426-14(2019)e1 Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques
- ASTM E1439-12(2019) Standard Guide for Conducting the Frog Embryo Teratogenesis Assay-Xenopus (FETAX)
- ASTM E1458-12(2022) Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
- ASTM E1486-14(2022) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
- ASTM E1486M-14(2022) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)
- ASTM E1515-14(2022) Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
- ASTM E1543-14(2022) Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging Systems
- ASTM E1629-12(2020) Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
- ASTM E1672-12(2020) Standard Guide for Computed Tomography (CT) System Selection
- ASTM E1676-12(2021) Standard Guide for Conducting Laboratory Soil Toxicity or Bioaccumulation Tests with the Lumbricid Earthworm Eisenia Fetida and the Enchytraeid Potworm Enchytraeus albidus
- ASTM E1780-12(2021) Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source
- ASTM E1799-12(2023) Standard Practice for Visual Inspections of Photovoltaic Modules
- ASTM E1803-14(2022) Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels
- ASTM E1829-14(2020) Standard Guide for Handling Specimens Prior to Surface Analysis
- ASTM E1835-14(2022) Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry