
【国外标准】 Standard Test Methods for Nitrogen in the Analysis Sample of Coal and Coke (Withdrawn 2008)
本网站 发布时间:
2024-02-28
- ASTM D3179-02e1
- Withdrawn, No replacement
- 定价: 0元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
Nitrogen results obtained by these test methods are required to fulfill the requirements of the ultimate analysis, Practice D 3176. Also, results obtained may be used to evaluate the potential formation of nitrogen oxides as a source of atmospheric pollution.Nitrogen data are used in comparing coals and in research. When the oxygen content of coal is estimated by difference, it is necessary to make a nitrogen determination.1.1 These test methods cover the determination of total nitrogen in samples of coal and coke. The analytical data from these test methods shall be reported as part of ultimate analysis where ultimate analysis is requested. If ultimate analysis is not requested, the value shall be reported according to the request. Two methods are included as follows: SectionsTest Method A—Kjeldahl-Gunning Macro Analysis, with an alternative technique included 9 to 16Test Method B—Kjeldahl-Gunning Semi-Micro Determination 17 to 231.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.3 The values stated in SI units are to be regarded as the standard.
标准号:
ASTM D3179-02e1
标准名称:
Standard Test Methods for Nitrogen in the Analysis Sample of Coal and Coke (Withdrawn 2008)
英文名称:
Standard Test Methods for Nitrogen in the Analysis Sample of Coal and Coke (Withdrawn 2008)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM E690-15(2020) Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes
- ASTM E691-23 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
- ASTM E693-23 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA)
- ASTM E695-22 Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
- ASTM E696-23 Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
- ASTM E697-96(2019) Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography
- ASTM E699-16 Standard Specification for Agencies Involved in Testing, Quality Assurance, and Evaluating of Manufactured Building Components
- ASTM E701-80(2018) Standard Test Methods for Municipal Ferrous Scrap
- ASTM E708-79(2017) Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
- ASTM E709-21 Standard Guide for Magnetic Particle Testing
- ASTM E715-80(2022) Standard Specification for Gravity-Convection and Forced-Circulation Water Baths
- ASTM E716-16(2021)e2 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
- ASTM E724-21 Standard Guide for Conducting Static Short-Term Chronic Toxicity Tests Starting with Embryos of Four Species of Saltwater Bivalve Molluscs
- ASTM E725-96(2021) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
- ASTM E726-01(2021) Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides