- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- AS >>
- AS/NZS ISO/IEC 24764:2012 Generic cabling systems for data centres
【国外标准】 Generic cabling systems for data centres
本网站 发布时间:
2021-03-22
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
暂无
标准号:
AS/NZS ISO/IEC 24764:2012
标准名称:
Generic cabling systems for data centres
英文名称:
Generic cabling systems for data centres标准状态:
现行-
发布日期:
2012-01-24 -
实施日期:
出版语种:
- 推荐标准
- ASTM ISO/ASTM51310-22 Standard Practice for Use of a Radiochromic Optical Waveguide Dosimetry System
- ASTM ISO/ASTM51539-23 Standard Guidance for Use of Radiation-Sensitive Indicators
- ASTM ISO/ASTM51607-13 Standard Practice for Use of the Alanine-EPR Dosimetry System
- ASTM ISO/ASTM51608-15(2022) Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV
- ASTM ISO/ASTM51631-20 Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams
- ASTM ISO/ASTM51650-13 Standard Practice for Use of a Cellulose Triacetate Dosimetry System
- ASTM ISO/ASTM51707-15 Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
- ASTM ISO/ASTM51900-23 Standard Guidance for Dosimetry for Radiation Research
- ASTM ISO/ASTM51939-17(2022) Standard Practice for Blood Irradiation Dosimetry
- ASTM ISO/ASTM52628-20 Standard Practice for Dosimetry in Radiation Processing
- ASTM ISO/ASTM52701-13(2020) Standard Guide for Performance Characterization of Dosimeters and Dosimetry Systems for Use in Radiation Processing
- ASTM ISO/ASTM52903-1-20 Additive manufacturing — Material extrusion-based additive manufacturing of plastic materials — Part 1: Feedstock materials
- ASTM ISO/ASTM52907-19 Additive manufacturing — Feedstock materials — Methods to characterize metallic powders
- ASTM ISO/ASTM52910-18 Additive manufacturing — Design — Requirements, guidelines and recommendations
- ASTM ISO/ASTM52911-1-19 Additive manufacturing — Design — Part 1: Laser-based powder bed fusion of metals