- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国际标准 >>
- 31.180 >>
- IEC 61249-2-23:2005 EN-FR 26e6ed32 Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad

【国际标准】 Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad
本网站 发布时间:
2024-05-13
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
IEC 61249-2-23:2005 EN-FR
标准名称:
Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad
英文名称:
Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad标准状态:
现行-
发布日期:
2005-01-11 -
实施日期:
出版语种:
EN-FR
- 其它标准
- 上一篇: IEC 61249-2-22:2005 EN-FR dbc58a8a Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad
- 下一篇: IEC 61249-2-26:2005 EN-FR 5f2c8f90 Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
- 推荐标准
- IEC 62899-201:2016+AMD1:2018 CSV EN b38108a1 Printed electronics - Part 201: Materials - Substrates
- IEC 62899-202-7:2021 EN 2976590d Printed electronics - Part 202-7: Materials - Printed film - Measurement of peel strength for printed layer on flexible substrate by 90° peel method
- IEC 62899-401:2017 EN e4014798 Printed electronics - Part 401: Printability - Overview
- IEC 62899-402-1:2017 EN a9782aa7 Printed electronics - Part 402-1: Printability - Measurement of qualities - Pattern width
- IEC 63251:2023 EN-FR 4107f0dd Test method for mechanical properties of flexible opto-electric circuit boards under thermal stress
- IEC PAS 61249-8-1:2014 EN f36f12bd Qualification and performance of electrical insulating compound for printed wiring assemblies
- IEC TR 61189-5-506:2019 EN 3059c021 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-506: General test methods for materials and assemblies - An intercomparison evaluation to implement the use of fine-pitch test structures for surface insulation resistance (SIR) testing of solder fluxes in accordance with IEC 61189-5-501
- IEC TR 63017:2015 EN 9c04821c Flexible printed circuit boards (FPCBs) - Method of compensation of impedance variations
- IEC 60947-4-3:2014 EN-FR 586da29a Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
- IEC 61188-5-3:2007 EN-FR 164db7fe Printed boards and printed board assemblies - Design and use - Part 5-3: Attachment (land/joint) considerations - Components with gull-wing leads on two sides
- IEC 61188-5-4:2007 EN_D b65fb522 Printed boards and printed board assemblies - Design and use - Part 5-4: Attachment (land/joint) considerations - Components with J leads on two sides
- IEC 61188-5-8:2007 EN-FR 8c4a78c6 Printed board and printed board assemblies - Design and use - Part 5-8: Attachment (land/joint) considerations - Area array components (BGA, FBGA, CGA, LGA)
- IEC 61188-5-8:2007 EN_D 25d727c6 Printed board and printed board assemblies - Design and use - Part 5-8: Attachment (land/joint) considerations - Area array components (BGA, FBGA, CGA, LGA)
- IEC 61188-6-4:2019 EN-FR 1bdbd71d Printed boards and printed board assemblies - Design and use - Part 6-4: Land pattern design - Generic requirements for dimensional drawings of surface mounted components (SMD) from the viewpoint of land pattern design
- IEC 61188-7:2009 EN_D 4950c8a6 Printed boards and printed board assemblies - Design and use - Part 7: Electronic component zero orientation for CAD library construction