
【国外标准】 Information technology - Data interchange on 12,7 mm 208-track magnetic tape cartridges - DLT 6 format
本网站 发布时间:
2022-07-01
- INCITS/ISO/IEC 16382:2000 [R2015]
- 现行
- 定价: 1092元 / 折扣价: 929 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This Standard specifies the physical and magnetic characteristics of a 12,7 mm wide, 208-track magnetic tape cartridge, to enable physical interchangeability of such cartridges between drives. It also specifies the quality of the recorded signals, a format - called Digital Linear Tape 6 (DLT 6) - and a recording method, thereby allowing data interchange between drives. Together with a labelling standard, for instance International Standard ISO 1001 for Magnetic Tape Labelling, it allows full data interchange by means of such magnetic tape cartridges.
标准号:
INCITS/ISO/IEC 16382:2000 [R2015]
标准名称:
Information technology - Data interchange on 12,7 mm 208-track magnetic tape cartridges - DLT 6 format
英文名称:
Information technology - Data interchange on 12,7 mm 208-track magnetic tape cartridges - DLT 6 format标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM E259-06(2015) Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical and Bi-Directional Geometries
- ASTM E2752-10(2015) Standard Guide for Evaluation of Residual Effectiveness of Antibacterial Personal Cleansing Products
- ASTM E2784-10(2015) Standard Test Method for Evaluation of the Effectiveness of Handwash Formulations Using the Paper Towel (Palmar) Method of Hand Contamination
- ASTM F1035-03(2015) Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System
- ASTM F2255-05(2015) Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
- ASTM F2258-05(2015) Standard Test Method for Strength Properties of Tissue Adhesives in Tension
- ASTM F2392-04(2015) Standard Test Method for Burst Strength of Surgical Sealants
- ASTM F2819-10(2015)e2 Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices
- ASTM F665-09(2015) Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application
- ASTM F754-08(2015) Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders
- ASTM ISO/ASTM51310-22 Standard Practice for Use of a Radiochromic Optical Waveguide Dosimetry System
- ASTM ISO/ASTM51539-23 Standard Guidance for Use of Radiation-Sensitive Indicators
- ASTM ISO/ASTM51607-13 Standard Practice for Use of the Alanine-EPR Dosimetry System
- ASTM ISO/ASTM51608-15(2022) Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV
- ASTM ISO/ASTM51631-20 Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams