【国外标准】 Identification Cards ?Recording Technique ?Part 1: Embossing
本网站 发布时间:
2025-07-17
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
适用范围:
This International Standard is one of a series of standards describing the parameters for identification cards. This part specifies requirements for embossed characters on identification cards. The embossed characters are intended for transfer of data either by use of imprinters or by visual or machine reading.
标准号:
ANSI/ISO/IEC 7811-1-1995
标准名称:
Identification Cards ?Recording Technique ?Part 1: Embossing
英文名称:
Identification Cards ?Recording Technique ?Part 1: Embossing标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ANSI/ISO/IEC 9593-1-1990/AM 1-1995 Information Processing Systems ?Computer Graphics ?Programmer抯 Hierarchical Interactive Graphics System (PHIGS) Language Bindings ?Part 1: FORTRAN ?Amendment 1
- 下一篇: ANSI/ISO 4873-1991 Information Processing ?Bit Code for Information Interchange ?Structure and Rules for Implementation
- 推荐标准
- ASTM C1702-23e1 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM D2555-17a(2024)e1 Standard Practice for Establishing Clear Wood Strength Values
- ASTM D4439-24e1 Standard Terminology for Geosynthetics
- ASTM D6724/D6724M-16(2024)e1 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
- ASTM F2623-24e1 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
- ASTM D1243-22e1 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers
- ASTM D1250-19e1 Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1
- ASTM D1264-18e1 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
- ASTM D1292-15(2021)e1 Standard Test Method for Odor in Water
- ASTM D1304-99(2020)e1 Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation
- ASTM D1385-07(2018)e1 Standard Test Method for Hydrazine in Water
- ASTM D1498-14(2022)e1 Standard Test Method for Oxidation-Reduction Potential of Water
- ASTM D1631-10(2018)e1 Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method
- ASTM D1971-16(2021)e1 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
- ASTM D2028/D2028M-15(2021)e1 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
我的标准
购物车
400-168-0010










