
【国外标准】 Standard Guide for Maintenance of Marine Sanitation Devices (MSDs) and the Effects of Cleaning Agents on MSD Operations
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 The guide provides information and clarity to support the health and maintenance of Marine Sanitation Devices (MSDs) on maritime vessels and platforms to promote effective operations and performance throughout the lifecycle. This includes identification of chemicals and their derivatives that can be detrimental to proper MSD operations. This guide will promote better understanding of the impacts of certain chemicals on the health and operations of MSD systems, plus provide guidance to inform operators of best practices and procedures for effective operations and maintenance. This guide is designed to assist both operators and MSD Original Equipment Manufacturers (OEMs) in collaboratively working to ensure effective operations and maintenance, and to reduce performance degradations that result from the introduction of harmful chemicals. The primary application of this guide is to Type II MSDs (described in Section 4), installed on larger ships and employing biological treatment of sewage and gray water.NOTE 1: This guide does not constitute regulations or ship classification society rules, which should be consulted where applicable.1.2 Manufacturers preparing new product specifications or revising existing ones should follow the practices and procedures outlined herein, and be guided by the latest specifications covering similar commodities. Similarly, vessel owner/operators should consult this guide regarding in-service operations and maintenance.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F3648-23
标准名称:
Standard Guide for Maintenance of Marine Sanitation Devices (MSDs) and the Effects of Cleaning Agents on MSD Operations
英文名称:
Standard Guide for Maintenance of Marine Sanitation Devices (MSDs) and the Effects of Cleaning Agents on MSD Operations标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM C1472-16(2022) Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
- ASTM C1473-19 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry
- ASTM C1477-19 Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry
- ASTM C1479/C1479M-22 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
- ASTM C1483/C1483M-17(2022) Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
- ASTM C1485-19 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
- ASTM C1486-18(2023) Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
- ASTM C1487-19 Standard Guide for Remedying Structural Silicone Glazing
- ASTM C1489-15(2022) Standard Specification for Lime Putty for Structural Purposes
- ASTM C1498-04a(2023) Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
- ASTM C1499-19 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C150/C150M-22 Standard Specification for Portland Cement
- ASTM C1504-20 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
- ASTM C1507-20 Standard Test Method for Radiochemical Determination of Strontium-90 in Soil
- ASTM C1508-18 Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy